Abstract:In recent years, molten salt reactors (MSRs) have gained new momentum thanks to their potential for innovation in the nuclear industry, and several studies on their compliance with all the expected safety features are currently underway. In terms of passive safety, a strategy currently envisaged in accidental scenarios is to drain by gravity the molten salt, which acts both as fuel and coolant, in an emergency draining tank, ensuring both a subcritical geometry and proper cooling. To activate the draining system, a freeze plug, made of the same salt used in the core, is expected to open when the temperature in the core reaches high values. Up to this point, the freeze valve is still a key concept in the molten salt fast reactor (MSFR), and special attention must be paid to its analysis, given the requirement for passive safety, especially focusing on melting and solidification phenomena related to the molten salt mixture. This work aims to contribute to the macroscale modeling of melting and solidification phenomena relevant to the analysis of the freeze valve behavior. In particular, the focus is on the identification of the numerical models that can be adopted to achieve the quantitative insights needed for the design of the freeze valve. Among the ones available in the literature, the most appropriate models were selected based on a compromise between accuracy and computational efficiency. A critical look at the models allows for a synthetic and consistent formulation of the numerical models and their implementation in the open-source software OpenFOAM. The code was subsequently verified using analytical and numerical solutions already well established in the literature. A good agreement between the results produced by the developed solver and the reference solutions was obtained. In the end, the code was applied to simple case studies related to the freeze valve system, focusing on recognizing whether the developed code can model physical phenomena that can occur in a freeze valve. The results of the simulations are encouraging and show that the code can be used to model single-region melting or solidification problems. As such, this work constitutes a starting point for further development of the code, intending to achieve better quantitative predictions for the design of a freeze valve.

Molten Salt Reactor thermal-fluid dynamics evaluation using a CFD code for a theoretical power density distribution

Experimental and numerical thermal-hydraulics investigation of a molten salt reactor concept core

ICONE19-43445 Investigating Thermal-Hydraulic Characteristic of Molten Fluoride Salt in A Circular Pipe Using A CFD Methodology

CFD simulations of Molten Salt Fast Reactor core cavity flows

Thermal Hydraulics Analyses of Radial Flow Core of Molten Salt Pebble Bed Reactor

CFD Simulations of the Molten Salt Fast Reactor

Neutronics and thermal-hydraulics coupling analysis using the FLUENT code and the RELAP5-3D code for a molten salt fast reactor

COUPLE, A Time-Dependent Coupled Neutronics and Thermal-Hydraulics Code, and its Application to MSFR

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept

Analysis of the thermal feedback effect and nuclides flow effect on the fuel‐cycle characteristics of Molten Salt Reactors

Numerical analysis and validation on heat transfer characteristics and correlation of molten salt in pebble bed channel

Coupled neutronics/thermal-hydraulics and safety characteristics of liquid-fueled Molten Salt Reactors

Core thermal hydraulic CFD support for liquid metal reactors

[ICAPP 2023] Experimental and numerical assessment of helium bubble lift during natural circulation for passive molten salt fast reactor

Numerical Modeling and Simulation of Melting Phenomena for Freeze Valve Analysis in Molten Salt Reactors

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Applications of Thermochemical Modeling in Molten Salt Reactors

Molten salts database for energy applications

Core calculations of the Molten Salt Fast Reactor using different computational codes

Preliminary Analysis and Design of the Energy Conversion System for the Molten Salt Fast Reactor

Molecular dynamics simulations for the prediction of thermophysical properties of plutonium-based molten salts