Abstract:Neutronic, thermal-hydraulics, and solid mechanics computations were used to study the different VVER-1000 reactors' operational conditions for the steady-state and the transient state. The main objective of these studies is to investigate the safe operating conditions, which is essential in determining the reactor safety limits. The coupling between different physics enables a better understanding of reactor phenomena and enhanced accuracy by reducing the assumption needed for separate calculations for different physics. MCNPX code is used to provide the source power distribution for two themes of calculations. The first theme is the analytical solution using MATLAB software, and the second theme is the finite element coupled physics using COMSOL Multiphysics. Analytical solutions using MATLAB software and results from COMSOL-Multiphysics were used to simulate the uncoupled analytical models and coupled models, respectively. The coupled theme provide feedbacks between different physics by iterating the solution between different physics; such as solving the heat transfer with taking into consideration the variation of the coolant velocity along the coolant channel and solving solid mechanics with taking into consideration the change of either the fuel and the clad temperatures distribution (thermal load) or the change in the coolant pressure (pressure load). While in the uncoupled solutions, certain assumptions reflect an average behavior for the effect of other physics on the physics under concern, such as the average pressure of the coolant and the average value for the coolant velocity. The obtained results are verified by comparing it to WIMS D-4 for neutronic calculations and COPERA-EN code for the thermal-hydraulic analytical solution. Also, thermal-hydraulic results by both coupled and uncoupled themes are verified against results from the final safety analysis report. The Departure from Nucleate Boiling Ratio (DNBR) and the Minimum Departure from Nucleate Boiling Ratio (MDNBR) were applied for the investigation of VVER-1000 reactor safety parameters. Solid mechanics, fluid dynamics and heat transfer were used to compute the maximum stress/maximum volumetric strain acting on both fuel and cladding material. Results from both methods satisfied the limits addressed by the designer and shows a good agreement with the other published works that used WIMS D-4 for neutronic calculations and COBRA-EN code for thermal-hydraulic calculations analytically. in addition, the maximum stress occurring on the fuel and clad materials didn't exceed the yield stress. Furthermore, the fuel material displacement didn't exceed the Helium gap thickness, which means the surface contact between the fuel and the clad material is impossible that prevents the chemical interaction between both fuel and clad at 1135 K.

Core calculations of the Molten Salt Fast Reactor using different computational codes

Research on CFD Calculation and Analysis Technology of Porous Media in Sodium Cooled Fast Reactor Core

CFD simulations of Molten Salt Fast Reactor core cavity flows

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Neutronic Analysis on Molten Salt Reactor (MSR) Using OpenMC Code With Variations of Geometry Core Fueled By LiF-BeF2-UF4

COUPLE, A Time-Dependent Coupled Neutronics and Thermal-Hydraulics Code, and its Application to MSFR

A multiphysics model of the versatile test reactor based on the MOOSE framework

Analysis of the thermal feedback effect and nuclides flow effect on the fuel‐cycle characteristics of Molten Salt Reactors

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Neutronics and thermal-hydraulics coupling analysis using the FLUENT code and the RELAP5-3D code for a molten salt fast reactor

Extended development of the Monte Carlo code MCNP for effective delayed neutron fraction calculation in molten salt reactors

Molten Salt Reactor thermal-fluid dynamics evaluation using a CFD code for a theoretical power density distribution

Geant4 Extension for Neutronic Calculation of Nuclear Reactor Core

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

Safety Enhancement in the Molten Salt Fast Reactor (MSFR)

Development and Verification of a Multi-Physics Transport Code of Molten Salt Reactor Fission Products

Modeling of the Molten Salt Reactor Experiment with SCALE

Test problem for thermal-hydraulics and neutronic coupled calculation fore ALFREAD reactor core

Comparative analysis between homogeneous and heterogeneous models of gas cooled fast reactor core (GFR-2400)

Thermal-hydraulic and solid mechanics safety analysis for VVER-1000 reactor using analytical and CFD approaches

Experimental and numerical thermal-hydraulics investigation of a molten salt reactor concept core