Abstract:Nuclear reactor modeling has been shifting, over the last decades, towards full-core multiphysics analysis due to the ever-increasing safety requirements and complexity of the designs of innovative systems. This is particularly true for liquid-fuel reactor concepts such as the Molten Salt Fast Reactor (MSFR), given their strong intrinsic coupling between thermal-hydraulics, neutronics and fuel chemistry. In the MSFR, fission products (FPs) are originated within the liquid fuel and are carried by the fuel flow all over the reactor core and through pumping and heat exchange systems. Some of FP species, in the form of solid precipitates, can represent a major design and safety challenge, e.g., due to deposition on solid boundaries, and their distribution in the core is relevant to the design and safety analysis of the reactor. In this regard it is essential, both for the design and the safety assessment of the reactor, the capability to model the transport of solid FPs and their deposition to the boundary (e.g., wall or heat exchanger structures). To this aim, in this study, models of transport of solid FPs in the MSFR are developed and verified. An Eulerian single-phase transport model is developed and integrated in a consolidated multiphysics model of the MSFR based on the open-source CFD library OpenFOAM. In particular, general mixed-type deposition boundary conditions are considered, to possibly describe different kinds of particle-wall interaction mechanisms. For verification purposes, analytical solutions for simple case studies are derived ad hoc based on the extension of the classic Graetz problem to linear decay, distributed source terms and mixed-type boundary conditions. The results show excellent agreement between the two models, and highlight the effects of decay and deposition phenomena of various intensity. The resulting approach constitutes a computationally efficient tool to extend the capabilities of CFD-based multiphysics MSFR calculations towards the simulation of solid fission products transport.

Extended development of the Monte Carlo code MCNP for effective delayed neutron fraction calculation in molten salt reactors

Analysis of the thermal feedback effect and nuclides flow effect on the fuel‐cycle characteristics of Molten Salt Reactors

Development and Verification of a Multi-Physics Transport Code of Molten Salt Reactor Fission Products

A Consistent One-Dimensional Multigroup Diffusion Model for Molten Salt Reactor Neutronics Calculations

The importance of delayed neutron precursors in gamma dose calculations for activated primary heat exchanger components in the Molten Salt Breeder Reactor

Core calculations of the Molten Salt Fast Reactor using different computational codes

COUPLE, A Time-Dependent Coupled Neutronics and Thermal-Hydraulics Code, and its Application to MSFR

Neutronics and thermal-hydraulics coupling analysis using the FLUENT code and the RELAP5-3D code for a molten salt fast reactor

Neutronics Analysis for MSR Cell with Different Fuel Salt Channel Geometry

Depletion calculation of subcritical system with consideration of spontaneous fission reaction

Neutronic analysis of european sodium-cooled fast reactor using Monte Carlo

Calculation acceleration for fuel cycle simulation of molten salt reactor based on multi-group cross section method

Monte Carlo simulation of dispersed coated particles in accident tolerant fuel for innovative nuclear reactors

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

An Analysis of Transport Effects in Steady-State Simulation of the Molten Salt Reactor Experiment

Development of Two-Step Method for Fast Chloride MSR Neutronics

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept

CFD simulations of Molten Salt Fast Reactor core cavity flows

Thermal-to-fusion Neutron Convertor and Monte Carlo Coupled Simulation of Deuteron/triton Transport and Secondary Products Generation

Nuclear Data Uncertainty Propagation for the Molten Salt Fast Reactor Design

An Eulerian Single-Phase Transport Model for Solid Fission Products in the Molten Salt Fast Reactor: Development of an Analytical Solution for Verification Purposes