Abstract:Using the Fully Ceramic Microencapsulated (FCM) fuel in light water reactors has multiple advantages, as it is accident tolerant because of; no hydrogen generation due to the cladding interaction with steam at high temperature, better retention of fission fragments and proliferation resistant due to very small production of transuranic elements during the burnup as compared to the standard UO2 fuel. In this study neutronics analysis of AT-FCM fuel consisting of TRISO particles embedded in SiC matrix is performed for replacement in existing VVER-1000 reactors. Standard VVER-1000 fuel assembly is transformed to Accident Tolerant Fully Ceramic Microencapsulated (AT-FCM) fuel assembly based on hydraulic diameter of the VVER-1000 assembly, the number of fuel pins are decreased with increased diameter and enrichment to conserve the initial fissile loading in AT-FCM assembly. Fuel centerline temperature of the AT-FCM assembly is found to be lower than the reference UO2 fuel assembly at the same total power produced because of the much higher thermal conductivity. FCM-TRISO fuel assembly namely Array 15 with 169 pins is proposed and analyzed. Pin cell, assembly level and full core calculations have been performed with SERPENT code using implicit and explicit models. VVER-1000 full core is modelled using the transformed FCM assembly. The embedded TRISO particles in a SiC matrix and the use of FeCrAl cladding turns out to be the perfect case for accident tolerance. High burnup of AT-FCM core in terms of MWd/kgHM for the same number of EFPDs is observed as compared to reference UO2 core due to the small breeding of transuranic elements Pu-239, Pu-240 and Pu-241. Appreciable quantity of the power is produced due to the fission of transuranic elements in reference UO2 assembly so the burnup in MWd/kgHM remains smaller than the AT-FCM fuel. Comparatively more softening of spectrum is found in AT-FCM fuel cells and assemblies towards the middle of the cycle (MOC) and End of the Cycle (EOC), this softening of spectrum tends to increase the rate of U-235 depletion. Very small quantities of plutonium isotopes are produced in AT-FCM as compared to the reference UO2 assembly because of small loading of U-238 at the BOC. The neutronics performance of AT-FCM core with burnable poison consisting of Gd2 O3 and Er2 O3 turn out to be better than reference UO2 assembly as it exhibits smooth burnup. Fuel Temperature Coefficient (FTC) and Moderator Temperature Coefficient (MTC) of the AT-FCM assembly is negative for most part of the cycle however, towards the end of cycle it becomes less negative due to small quantities of resonance absorbers, softening of thermal flux and increased rate of fission absorption in UO2 .

Core analysis of fully ceramic microencapsulated fuel (FCM) for SMART reactor under normal operation and reactivity insertion accident

Analysis of SMART reactor core with uranium mononitride for prolonged fuel cycle using OpenMC

Neutronics Analysis of VVER-1000 Core Using At-Fcm Fuel

Investigation on the Irradiation-thermal–mechanical Coupling Behaviors of the Solid Microencapsulated Fuel Rod

Heat Transfer Performance of the Solid Microencapsulated Fuel in Light Water Reactors

Modeling of Irradiation-Induced Thermo-Mechanical Coupling and Multi-Scale Behavior in a Fully Ceramic-Microencapsulated Fuel Pellet

Analysis of Optimum Accident Tolerant Fuel and Cladding Behavior in Advanced Pressurized Water Reactor

Neutronic analysis of fuel assembly loading patterns in small integrated pressurized water reactor core and fuel shifting strategy concept design

Thermal Hydraulic Design and Evaluation of the Solid Microencapsulated Fuel in Light Water Reactors

Neutronic Design and Evaluation of the Solid Microencapsulated Fuel in LWR

Neutronic Analysis of Accident‐Tolerant Cladding Materials in 3D Full Core BEAVRS PWR Benchmark Using OpenMC Code

Monte Carlo simulation of dispersed coated particles in accident tolerant fuel for innovative nuclear reactors

Effects of the Mesostructures and Irradiation Conditions on the Thermo-Mechanical Coupling Behaviors in LWR-used Fully Ceramic-Microencapsulated Fuel Pellets

Numerical Simulation Research on the Irradiation-Thermal-Mechanical Performance Evolution of FCM Fuel

Fuel Performance Comparison of Uranium Nitride and Uranium Carbide in VVER-1200 using OpenMC

Influence of Accident-Tolerant Fuel With Steel Cladding for Sustainable Heat Transfer in the Reactor Core of VVER-1200

Multi-Objective Optimization Design of TRISO-based Fully Ceramic Microencapsulated Fuel

Steady-State Fuel Performance Analyses for the Preliminary Fuel Concept of General Atomics Fast Modular Reactor

AP-1000 fuel assembly performance with UO2 and UO2/U3Si2 fuels and silicon carbide cladding from the viewpoint of neutronics

Verification of the Coupled Code PARCS/TWOPORFLOW with Rod Ejection Accident Calculations for Small Modular Reactors

Sensitivity study of core characteristic parameter of ATF loaded APR1400 core and cycle length compensation by enrichment adjustment