Abstract:Understanding fuel system behavior during postulated loss-of-coolant accidents is pertinent for continued safe and efficient operation of light water reactors, particularly as higher burnups are being pursued and safety margins re-evaluated. Conventional mechanical models for the incumbent Zr alloys typically rely on the assumption that steady-state creep is the dominant fuel cladding response during transient accident conditions. To investigate this assumption, simulated accident burst testing was performed on Zircaloy-4 claddings with balloon behavior measured in-situ . Two distinct loading conditions were utilized during burst testing: (1) constant-gas-inventory where pressure was allowed to increase with temperature and (2) constant pressure. In-situ strains and strain rates were measured via 2-dimensional digital image correlation techniques and synchronized with temperature to determine deformation dependencies. The temperature dependence of strain rate was characterized by a two segment Arrhenius relationship, with a distinct transition between the high and low temperature/strain regimes. The average activation energy of the lower temperature/strain regime was 328 ± 25 kJ/mol, in agreement with the ∼320 kJ/mol used for conventional LOCA models. However, the higher temperature/strain segment, which encompassed most of ballooning, showed increased activation energies as well as a dependence on whether the burst region was in view. For tests that burst away from the camera view, the average high temperature/strain segment activation energy was 635 ±150 kJ/mol. For samples where the rupture opening formed in view, the average activation energy was 1015 ± 179 kJ/mol. This observed shift in temperature dependence indicates a transition in deformation mechanism at the end of life, possibly to time independent failure mechanisms, which has not yet been visualized in the literature for Zr alloys. Parameters at the transition points were analyzed to determine thresholds for this change in behavior, which occurred at an average hoop strain of 6.9 ± 2.1 %.

A study on the fracture pattern change of high-burnup fuel cladding failed by pellet-cladding mechanical interaction failure under reactivity-initiated accident conditions

Numerical simulation of mechanical interaction between pellet and zircaloy-4 cladding under reactivity-initiated accident conditions

Effects of Pre-Crack Depth and Hydrogen Absorption on the Failure Strain of Zircaloy-4 Cladding Tubes Under Biaxial Strain Conditions

Thermomechanical Assessment of Fuel Rod Cladding Made of Zirconium Alloy and Silicon Carbide Material During Reactivity-Initiated Accident

Post irradiation examinations of FeCrAl cladding in PWR conditions

Ductile tearing criteria and failure probability estimation of hydrided Zircaloy-4 cladding under axial loads

Thermal-Mechanical performance analysis of a petal-shaped fuel rod under RIA condition

Research on Compliance Between Large Break LOCA of HPR1000 and New LOCA Acceptance Criterion 10Cfr50.46c

Steady-State Performance Analysis of a Dual-Cladding Design for Accident Tolerance Fuel

The critical influencing factors responsible for the particle cracking in UMo/Zr dispersion fuel plates during post-irradiation anneal tests

Modeling of Irradiation-Induced Damage and Failure Behaviors of Fuel Foil/cladding Interface in UMo/Zr Monolithic Fuel Plates

Neutronic Analysis of Accident‐Tolerant Cladding Materials in 3D Full Core BEAVRS PWR Benchmark Using OpenMC Code

Research on In-Pile Thermal-Mechanical Behavior of UMo/Zr Monolithic Fuel Plates

3-Dimensional Multiphysics Modeling of Behaviors of Pressurized Water Reactor Fuel Rods With Missing Pellet Surface

Three-dimensional FE analysis of the thermal-mechanical behaviors in the nuclear fuel rods

In-situ determination of strain during transient burst testing and the temperature dependence of Zircaloy-4 claddings

In situ X-ray computed micro-tomography imaging of failure processes in Cr-coated Zircaloy nuclear fuel cladding materials

Fuel performance of chromium-coated zirconium alloy and silicon carbide accident tolerant fuel claddings

Analysis on Pellet-Cladding Interaction of Fuel Rod During Power Ramp of NHR200-II

Neutronic Analysis on Potential Accident Tolerant Fuel-Cladding Combination U$_3$Si$_2$-FeCrAl

Impact of LWR assembly structural features on cladding burst behavior under LOCA conditions