Abstract:The abrasion mechanism in solid-solid contact mode of the chemical mechanical polishing (CMP) process is investigated in detail. Based on assumptions of plastic contact over wafer-abrasive and pad-abrasive interfaces, the normal distribution of abrasive size and an assumed periodic roughness of pad surface, a novel model is developed for material removal in CMP. The basic model is MMR = rho (w)NVol(removed), where rho (w) is the density of wafer, N the number of active abrasives, and Vol(removed) the volume of material removed by a single abrasive. The model proposed integrates process parameters including pressure and velocity and other important input parameters including the wafer hardness, pad hardness, pad roughness, abrasive size, and abrasive geometry into the same formulation to predict the material removal rate (MRR). An interface between the chemical effect and mechanical effect has been constructed through a fitting parameter H-w, "dynamical" hardness value of the wafer surface, in the model. It reflects the influences of chemicals on the mechanical material removal. The fluid effect in the current model is attributed to the number of active abrasives. It is found that the nonlinear down pressure dependence of material removal rate is related to a probability density function of the abrasive size and the elastic deformation of the pad. Compared with experimental results, the model accurately predicts MRR. With further verification of the model, a better understanding of the fundamental mechanism involved in material removal in the CMP process, particularly different roles played by the consumables and their interactions, can be obtained.

An Analytical Aspect of the Preston Equation

Modeling and Experimental Analysis of the Material Removal Rate in the Chemical Mechanical Planarization of Dielectric Films and Bare Silicon Wafers

Modified Preston Equation- Revisited

Polisher density into Preston equation

Study on the Removal Function of Annular Polishing Pad Based on the Computer Controlled Polishing Technology

A Model for Mechanical Wear and Abrasive Particle Adhesion during the Chemical Mechanical Polishing Process

An experimental and numerical analysis on the validity of Preston coefficients in mechanistic prediction methods used for abrasive flow machining (AFM)

Development of the improved Preston equation for abrasive flow machining of aerofoil structures and components

Modification of the Preston equation for the chemical–mechanical polishing of copper

Non-continuum Material Removal Mechanism of Surface Polishing with Ultra Precision

Theoretical and experimental analysis for the surface shape evolution of ultrathin workpiece considering the pad surface shape in double-sided polishing

Material Removal Mechanism in Chemical Mechanical Polishing: Theory and Modeling

Study on the influence of the relative position of the polishing pad to the removal quantity in two-axis lapping/polishing mode

A model for chemical–mechanical polishing of a material surface based on contact mechanics

Modeling and analysis of the material removal depth for stone polishing

Experimental Investigation and Modeling of Friction Coefficient and Material Removal During Optical Glass Polishing

A Coupled Material Removal Model for Chemical Mechanical Polishing Processes

Uniform Polishing Method of Spherical Lens Based on Material Removal Model of High-Speed Polishing Procedure

Material Removal Regions in Chemical Mechanical Polishing: Coupling Effects of Slurry Chemicals, Abrasive Size Distribution and Wafer-Pad Contact Area, Part 1

Theoretical Modeling Method for Material Removal Characteristics of Abrasive Water Jet Polishing under Rotating Oblique Incidence

A plasticity-based model of material removal in chemical-mechanical polishing (CMP)