Abstract:With the rapid progress of science and technology, many applications of hard and brittle materials require advanced and suitable machining-techniques. One technique in particular, ultrasonic vibration-assisted polishing (UVAP), has been studied intensively by researchers worldwide. These studies indicate that UVAP has the capability to improve the surface quality as well as the machining efficiency. However, few studies focus on the deterministic material-removal of UVAP. The difference between generated and theoretical surface profiles determines the surface accuracy. Therefore, this paper focuses on predicting the generated local surface profile and providing a theoretical basis to reduce this error by controlling the polishing parameters. In addition to the axial ultrasonic vibration of polishing tool, ultrasonic atomization was adopted to provide uniformly distributed polishing slurry. To ensure sufficient surface-accuracy, it is necessary to predict the generated surface profile for a fixed spot as a basis research. This means, to enable accurate predictions the following improvements are realized: (i) A novel model for the elastic spherical contact-deformation of the polishing tool is used to calculate both the polishing force and contact radius. It takes into account the nonlinear elasticity of the polishing tool and the lateral extension of the contact area, which makes it more consistent with the actual deformation. (ii) A novel model for the material-removal distribution function for UVAP is proposed, based on the Preston equation. It considers the periodic changes of polishing force and contact radius caused by ultrasonic vibration. (iii) A series of fixed-spot polishing experiments on BK7 glass are carried out to verify the proposed models. The results show that the Preston coefficient is affected by axial ultrasonic amplitude, and large ultrasonic amplitude improves the polishing ability. In addition, the generated local surface profile, the maximum contact radius, as well as the material-removal depth and material-removal rate (MRR) can be predicted well. The new models not only provide a possibility to realize deterministic material removal but also enables in-depth-understanding of UVAP. It also represents a basic theoretical foundation for future, flat or free-form surface-polishing.

Experimental Investigation and Modeling of Friction Coefficient and Material Removal During Optical Glass Polishing

Experimental Investigation of Material Removal and Surface Roughness during Optical Glass Polishing

Experimental investigation of polishing process for Schott BK-7 optical glass

Influences of polishing tool's shape on surface roughness in magneto-rheological finishing

Predictive modeling and experimental study of polishing force for ultrasonic vibration-assisted polishing of K9 optical glass

Theoretical and experimental investigation on material removal mechanism in dual-rotation polishing of fused silica glass

Removal Modeling and Experimental Verification of Magnetorheological Polishing Fused Silica Glass

Non-continuum Material Removal Mechanism of Surface Polishing with Ultra Precision

Curvature effect-based modeling and experimentation of the material removal in polishing optical surfaces using a flexible ball-end tool

Study on machining BK7 optical glass by ultrasonic vibration-assisted polishing considering the micro-contact state of the abrasive particles with the workpiece

Investigation of Material Removal Distributions and Surface Morphology Evolution in Non-Contact Ultrasonic Abrasive Machining (NUAM) of BK7 Optical Glasses

Quantum Mechanism of Optical Glass Polishing

Modeling and analysis for material removal and surface roughness in fluid jet polishing of optical glass

Theoretical Modeling and Experimental Analysis of Single-Particle Erosion Mechanism of Optical Glass

Model for Predicting the Micro-Grinding Force of K9 Glass Based on Material Removal Mechanisms

Chemical Mechanical Polishing of Glass Disk Substrates: Preliminary Experimental Investigation

Material removal profile prediction and experimental validation for obliquely axial ultrasonic vibration-assisted polishing of K9 optical glass

Modeling and prediction of generated local surface profile for ultrasonic vibration-assisted polishing of optical glass BK7

A Coupled Material Removal Model for Chemical Mechanical Polishing Processes

Modeling and Experimental Analysis of the Material Removal Rate in the Chemical Mechanical Planarization of Dielectric Films and Bare Silicon Wafers

Material Removal Mechanism in Chemical Mechanical Polishing: Theory and Modeling