Practical Design Considerations for a Si IGBT + SiC MOSFET Hybrid Switch: Parasitic Interconnect Influences, Cost, and Current Ratio Optimization

Amol Deshpande,Fang Luo

DOI: https://doi.org/10.1109/tpel.2018.2827989

IF: 5.967

2019-01-01

IEEE Transactions on Power Electronics

Abstract:In this paper, a hybrid switch (HyS) consisting of a large current rated Si insulated-gate bipolar transistor (IGBT) device connected in parallel with a small current rated SiC MOSFET device (low SiC/Si current ratio below unity) is proposed for high-current high-power converters. A systematic analysis involving a parametric sweep to understand the influence and to derive a boundary line of the parasitic interconnection inductance unbalance between Si and SiC within the HyS is presented. The boundary line prescribes the selection of an appropriate gate sequence control. A comprehensive cost analysis was performed using commercial 1.2kV devices to demonstrate the cost viability of a 1:4 or 1:6 SiC/Si current ratio HyS compared to a SiC MOSFET. An algorithm using a dynamic junction temperature prediction is presented to select an optimum SiC/Si current ratio, which ensures a reliable HyS operation. Using a design example, the possibility of reliability using a 1:6 SiC/Si HyS is studied. A 650V Si-IGBT- and SiC-MOSFET-based HyS (1:5 SiC/Si current ratio) was successfully demonstrated in a dcdc boost converter. Also, electromagnetic interference analysis is presented for the HyS-based converter operation.

engineering, electrical & electronic