Abstract:Reliability remains an issue for the Si/SiC hybrid switch adopting the conventional switching strategy of the internal SiC MOSFET that turns on earlier, and off later. Such issue is attributable to the overcurrent stress under the heavy load operating condition, which adversely affects the SiC MOSFET during the gate delay time. To solve this problem without increasing the extra power loss, a novel variable-frequency current-dependent switching strategy combining the variable switching pattern strategy, and the variable pulsewidth modulation (PWM) frequency strategy is proposed. Variable switching pattern strategy can avoid the overcurrent stress of the SiC MOSFET at the heavy load operating condition, and the designed optimal delay time in different switching patterns can achieve the compromise between the excellent reliability, and the power loss of Si/SiC hybrid switch. Variable PWM frequency strategy can effectively reduce the switching loss of the Si/SiC hybrid switch by decreasing the switching frequency around the peak current region. An Si/SiC-hybrid-switch-based single-phase inverter platform is constructed and tested. Test results show that the power loss of the single-phase inverter adopting such switching strategy outperforms the current-dependent switching strategy with 9.4% reduction of power loss, and overcurrent stress of SiC MOSFET is avoided.

A New Control Strategy for Converters Based on Hybrid Switch

Operation and Modulation of H7 Current Source Inverter with Hybrid SiC and Si Semiconductor Switches

100Kw Soft Switching Three-Phase Inverter with Hybrid Switches

Hybrid SiC-Si DC–AC Topology: SHEPWM Si-IGBT Master Unit Handling High Power Integrated with Partial-Power SiC-MOSFET Slave Unit Improving Performance

Efficiency Improvement of Grid Inverters With Hybrid Devices

Space Vector Modulation for SiC & Si Hybrid Active Neutral Point Clamped Converter

Switching Frequency Optimization Method and Control Strategy of Propulsion Inverter for Multiphase Motors with Hybrid SiC-MOS and Si-IGBT Bridge Legs

Adaptive Gate Delay-Time Control of Si/SiC Hybrid Switch for Efficiency Improvement in Inverters

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

A 1200 V/200 A Half-Bridge Power Module Based on Si IGBT/SiC MOSFET Hybrid Switch

Hybrid Modulation Strategy for Two-Stage Matrix Converter and its Application in Vector Control of Doubly Fed Induction Generator.

Practical Design Considerations for a Si IGBT + SiC MOSFET Hybrid Switch: Parasitic Interconnect Influences, Cost, and Current Ratio Optimization

A Control Method for the Interleaved Active Power Filter with SiC-MOSFETs

A Hybird Synchronous Rectification Scheme with Independent Turn-on and Turn-off Timing Control for SiC-Based CLLC Converters

Control Strategy of a Hybrid SiC-Si Traction Inverter for Direct-Drive Multiphase PMSMs in Marine Propulsion

Investigation of Hybrid Three-Level Hybrid Device (Hybrid<sub>2</sub>) Active Neutral-Point-Clamped Converter

Investigation of Hybrid Three-Level Hybrid Device (Hybrid<inf>2</inf>) Active Neutral-Point-Clamped Converter

A Hybrid Three-Phase Seven-Level CHB Inverter with a Novel Modulation Scheme

Multifunction Control Strategy for Single-Phase AC/DC Power Conversion Systems with Voltage-Sensorless Power-Decoupling Function

A Variable-Frequency Current-Dependent Switching Strategy to Improve Tradeoff Between Efficiency and SiC MOSFET Overcurrent Stress in Si/SiC-Hybrid-Switch-Based Inverters

A Dual-Current-Path State Based Multi-Step Soft-Switching Modulation Scheme for Hybrid Device Multilevel Converters