Abstract:The development of high-performance integrated circuit chips and the shrinkage of feature sizes according to Moore’s law bring forward continuously the requirements for low dielectric constant (low-k) materials with various excellent properties in the back-end-of-the-line (BEOL) interconnect. Porous SiCOH films prepared by plasma enhanced chemical vapor deposition (PECVD) through a porogen approach are widely applied to industry and extensively studied. Thermal annealing is an important process for fabricating the porous low-k films, which has a great influence on film structure as well as properties. SiCOH films are deposited by PECVD using tetraethoxysilane and limonene as precursors, and annealed at 450 ℃ for 1.5 h under nitrogen atmosphere. The evolutions of film structure and properties during thermal annealing are revealed, and the reaction mechanism for structure change is also proposed. Fourier transform inferred spectroscopy and solid state nuclear magnetic resonance results show that the as-deposited film is an organic-inorganic hybrid film composed of various kinds of Si-O-Si, -CHx, Si-O-CH2CH3, etc. The organic component is removed almost completely during thermal annealing, making a porous film with a Si-O-Si inorganic skeleton. The skeleton is also rearranged at the same time. Deconvolution of the Si-O-Si absorption band of the FTIR spectrum reveals that the cage-like Si-O-Si occupies the major part for both as-deposited and annealed films, while the amount of silicon suboxide Si-O-Si decreases and that of network Si-O-Si increases during thermal annealing, making the film more robust. More C=C and Si-C are formed through chemical reactions between Si-H, -CHx and Si-O-CH2-CH3, and crosslinking is further enhanced. Nitrogen adsorption/desorption isothermal measurement reveals that a large number of micropores with diameter less than 2-3 nm are created during thermal annealing, which is consistent with the removal of organic groups and the existence of cage-like Si-O-Si. As a result, both the refractive index and dielectric constant decrease significantly from 1.476 (λ =630 nm) and 3.45 to 1.365 and 2.60, respectively. Because of the increase of C=C after annealing, extinction coefficient and leakage current density increase. Although there is a shrinkage of 14.7% in film thickness and a reduction of mechanical properties after annealing, the Young’s modulus is still larger than 4 GPa. Considering all kinds of properties, the obtained film appears to be a competitive candidate as inter layer dielectrics in the BEOL interconnect of integrated circuits.

3D imaging of backside metallization of SiC-SBD influenced by annealing

Morphological and electrical properties of Nickel based Ohmic contacts formed by laser annealing process on n-type 4H-SiC

Effects of the Annealing Temperature on Ni Silicide/n-Si(100) Schottky Contacts

Carbon and Silicon Related Surface Compounds of Palladium Ultrathin Films on SiC after Different Annealing Temperatures

Effect of Annealing on Ni Ohmic Contact of 3C -Sic

Characteristics of Ni-based ohmic contacts on n-type 4H-SiC using different annealing methods

Analysis of Energy Density and Scanning Speed Impacts on Ni/Sic Ohmic Contacts During Laser Annealing

Effect of Gas Annealing on the Electrical Properties of Ni/AlN/SiC

X-Ray Characterization Of Beta-Sic Growth And Structural Modification Of Si By Mev Ion Implantation

Fabrication of Ohmic Contact on N-Type SiC by Laser Annealed Process: A Review

Numerical Simulation on Controlling the Front-Side Temperature of Thinned SiC Substrate During Ohmic Contact to Ni or Ti Using Back-Side Laser Annealing

Ohmic Contact Characteristics of Silicon Carbide-based MEMS Devices

Effect of high temperature annealing (T > 1650°C) on the morphological and electrical properties of p-type implanted 4H-SiC layers

Study of Interface State Density and Effective Oxide Charge in Post-Metallization Annealed SiO/sub 2/-Sic Structures

Microstructure Evolution of the Interface in SiCf/TiC-Ti3SiC2 Composite under Sequential Xe-He-H Ion Irradiation and Annealing Process

Annealing Process Influence And Dopant-Silicide Interaction In Self-Aligned Nisi Technology

Effect of Thermal Annealing on the Structure and Properties of Plasma Enhanced Chemical Vapor Deposited Sicoh Film

Ni/4H-SiC Ohmic Contact Formation Using Multipulse Nanosecond Laser Annealing

Formation Mechanism, Interface Characteristics and the Application of Metal/sic Thin-Film Ohmic Contact after High-Temperature Treatment

The Ohmic Contact of 4H-Sic Power Devices by Pulse Laser Annealing and Rapid Thermal Annealing

Ohmic contacts on n-type and p-type cubic silicon carbide (3C-SiC) grown on silicon