Abstract:In this work, an ultra‐thin zinc nitride (Zn3N2) layer is introduced on the NiOx surface is chosen to prevent these redox reactions and interfacial issues using a simple solution process at low temperatures. The redox reaction and non‐radiative recombination at the interface of the perovskite and NiOx reduce chemically by using interface modifier Zn3N2 to reduce hydroxyl group and defects on the surface of NiOx. A thin layer of Zn3N2 at the NiOx/perovskite interface results in a high Ni3+/Ni2+ ratio and a significant work function (WF), which inhibits the redox reaction and provides a highly aligned energy level with perovskite crystal and rigorous trap‐passivation ability. Consequently, Zn3N2‐modified NiOx‐based PSCs achieve a champion PCE of 21.61%, over the NiOx‐based PSCs. After Zn3N2 modification, the PSC can improve stability under several conditions. For p‐i‐n perovskite solar cells (PSCs), nickel oxide (NiOx) hole transport layers (HTLs) are the preferred interfacial layer due to their low cost, high mobility, high transmittance, and stability. However, the redox reaction between the Ni≥3+ and hydroxyl groups in the NiOx and perovskite layer leads to oxidized CH3NH3+ and reacts with PbI in the perovskite, resulting in a large number of non‐radiative recombination sites. Among various transition metals, an ultra‐thin zinc nitride (Zn3N2) layer on the NiOx surface is chosen to prevent these redox reactions and interfacial issues using a simple solution process at low temperatures. The redox reaction and non‐radiative recombination at the interface of the perovskite and NiOx reduce chemically by using interface modifier Zn3N2 to reduce hydroxyl group and defects on the surface of NiOx. A thin layer of Zn3N2 at the NiOx/perovskite interface results in a high Ni3+/Ni2+ ratio and a significant work function (WF), which inhibits the redox reaction and provides a highly aligned energy level with perovskite crystal and rigorous trap‐passivation ability. Consequently, Zn3N2‐modified NiOx‐based PSCs achieve a champion PCE of 21.61%, over the NiOx‐based PSCs. After Zn3N2 modification, the PSC can improve stability under several conditions.

From Bulk to Surface: Sodium Treatment Reduces Recombination at the Nickel Oxide/Perovskite Interface

Tuning Surface Oxidation States of Nickel Oxide for Efficient Inverted Perovskite Solar Cells

Overcoming Ni 3+ ‐Induced Non‐Radiative Recombination at Perovskite‐Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Surface Sulfuration of NiO Boosts the Performance of Inverted Perovskite Solar Cells

Suppressing Redox Reactions at the Perovskite‐Nickel Oxide Interface with Zinc Nitride to Improve the Performance of Perovskite Solar Cells

Recrystallizing Sputtered NiOx for Improved Hole Extraction in Perovskite/Silicon Tandem Solar Cells

Inorganic ammonium salt doping in nickel oxide for highly efficient planar perovskite solar cells

Impact of nickel oxide/perovskite interfacial contact on the crystallization and photovoltaic performance of perovskite solar cells

Bifunctional Surface Engineering on SnO 2 Reduces Energy Loss in Perovskite Solar Cells

Managing the Double-Edged Sword of Ni3+ in Sputter-Deposited NiOx by Interfacial Redox Reactions for Efficient Perovskite Solar Cells

Synergistic Redox Modulation for High‐Performance Nickel Oxide‐Based Inverted Perovskite Solar Modules

Overcoming Redox Reactions at Perovskite-Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Revivification of nickel oxide-perovskite interfaces via nickel nitrate to boost performance in perovskite solar cells

Boosting interfacial contact for the NiO x -based inverted perovskite solar cells via D-A type semiconductor

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Enhancement of NiOx/poly‐Si Contact Performance by Insertion of an Ultrathin Metallic Ni Interlayer

Suppressing Nickel Oxide/Perovskite Interface Redox Reaction and Defects for Highly Performed and Stable Inverted Perovskite Solar Cells

Effect of surface treatment of sputtered nickel oxide in inverted perovskite solar cells

NaCl-assisted Defect Passivation in the Bulk and Surface of TiO2 Enhancing Efficiency and Stability of Planar Perovskite Solar Cells

Interfacial Engineering of Nickel Oxide-Perovskite Interface with Amino Acid Complexed NiO to Improve Perovskite Solar Cell Performance

Doping Effects in SnO2 Transport Material for High Performance Planar Perovskite Solar Cells