Abstract:In this work, an ultra‐thin zinc nitride (Zn3N2) layer is introduced on the NiOx surface is chosen to prevent these redox reactions and interfacial issues using a simple solution process at low temperatures. The redox reaction and non‐radiative recombination at the interface of the perovskite and NiOx reduce chemically by using interface modifier Zn3N2 to reduce hydroxyl group and defects on the surface of NiOx. A thin layer of Zn3N2 at the NiOx/perovskite interface results in a high Ni3+/Ni2+ ratio and a significant work function (WF), which inhibits the redox reaction and provides a highly aligned energy level with perovskite crystal and rigorous trap‐passivation ability. Consequently, Zn3N2‐modified NiOx‐based PSCs achieve a champion PCE of 21.61%, over the NiOx‐based PSCs. After Zn3N2 modification, the PSC can improve stability under several conditions. For p‐i‐n perovskite solar cells (PSCs), nickel oxide (NiOx) hole transport layers (HTLs) are the preferred interfacial layer due to their low cost, high mobility, high transmittance, and stability. However, the redox reaction between the Ni≥3+ and hydroxyl groups in the NiOx and perovskite layer leads to oxidized CH3NH3+ and reacts with PbI in the perovskite, resulting in a large number of non‐radiative recombination sites. Among various transition metals, an ultra‐thin zinc nitride (Zn3N2) layer on the NiOx surface is chosen to prevent these redox reactions and interfacial issues using a simple solution process at low temperatures. The redox reaction and non‐radiative recombination at the interface of the perovskite and NiOx reduce chemically by using interface modifier Zn3N2 to reduce hydroxyl group and defects on the surface of NiOx. A thin layer of Zn3N2 at the NiOx/perovskite interface results in a high Ni3+/Ni2+ ratio and a significant work function (WF), which inhibits the redox reaction and provides a highly aligned energy level with perovskite crystal and rigorous trap‐passivation ability. Consequently, Zn3N2‐modified NiOx‐based PSCs achieve a champion PCE of 21.61%, over the NiOx‐based PSCs. After Zn3N2 modification, the PSC can improve stability under several conditions.

Interfacial Engineering of Nickel Oxide-Perovskite Interface with Amino Acid Complexed NiO to Improve Perovskite Solar Cell Performance

Interfacial Engineering of Nickel Oxide‐Perovskite Interface with Amino Acid Complexed NiO to Improve Perovskite Solar Cell Performance

Impact of nickel oxide/perovskite interfacial contact on the crystallization and photovoltaic performance of perovskite solar cells

Revivification of nickel oxide-perovskite interfaces via nickel nitrate to boost performance in perovskite solar cells

Suppressing Nickel Oxide/Perovskite Interface Redox Reaction and Defects for Highly Performed and Stable Inverted Perovskite Solar Cells

Modulation on electrostatic potential to build a firm bridge at NiO x /perovskite interface for efficient and stable perovskite solar cells

Evaporated Nickel Oxide Films with Slow Annealing and Interface Modification for Perovskite Solar Cells

Boosting interfacial contact for the NiO x -based inverted perovskite solar cells via D-A type semiconductor

Bi-Directional Modification to Quench Detrimental Redox Reactions and Minimize Interfacial Energy Offset for NiOX/Perovskite-Based Solar Cells

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Linked Nickel Oxide/Perovskite Interface Passivation for High‐Performance Textured Monolithic Tandem Solar Cells

Efficiency enhancement of perovskite solar cells based on Al2O3-passivated nano-nickel oxide film

Interfacial Modification via Aniline Molecules with Multiple Active Sites for Performance Enhancement of n-i-p Perovskite Solar Cells

Suppressing Redox Reactions at the Perovskite‐Nickel Oxide Interface with Zinc Nitride to Improve the Performance of Perovskite Solar Cells

The effects of interfacial dipole caused by annealing-free Al-doped NiOx in efficient perovskite solar cells

Cation-size mismatch and interface stabilization for efficient NiOx-based inverted perovskite solar cells with 21.9% efficiency

High Efficiency and Stability of Inverted Perovskite Solar Cells Using Phenethyl Ammonium Iodide-Modified Interface of NiOx and Perovskite Layers

Surface Passivation of Sputtered NiO x Using a SAM Interface Layer to Enhance the Performance of Perovskite Solar Cells

NiOx for interface and work function engineering in carbon-based all-inorganic perovskite solar cells

Interfacial Competing Interaction Eliminates Voids in the Buried Interface for Efficient and Stable Perovskite Solar Modules on Bare NiOX

Dual Surface Modifications of NiOx/Perovskite Interface for Enhancement of Device Stability