Abstract:In this work, an ultra‐thin zinc nitride (Zn3N2) layer is introduced on the NiOx surface is chosen to prevent these redox reactions and interfacial issues using a simple solution process at low temperatures. The redox reaction and non‐radiative recombination at the interface of the perovskite and NiOx reduce chemically by using interface modifier Zn3N2 to reduce hydroxyl group and defects on the surface of NiOx. A thin layer of Zn3N2 at the NiOx/perovskite interface results in a high Ni3+/Ni2+ ratio and a significant work function (WF), which inhibits the redox reaction and provides a highly aligned energy level with perovskite crystal and rigorous trap‐passivation ability. Consequently, Zn3N2‐modified NiOx‐based PSCs achieve a champion PCE of 21.61%, over the NiOx‐based PSCs. After Zn3N2 modification, the PSC can improve stability under several conditions. For p‐i‐n perovskite solar cells (PSCs), nickel oxide (NiOx) hole transport layers (HTLs) are the preferred interfacial layer due to their low cost, high mobility, high transmittance, and stability. However, the redox reaction between the Ni≥3+ and hydroxyl groups in the NiOx and perovskite layer leads to oxidized CH3NH3+ and reacts with PbI in the perovskite, resulting in a large number of non‐radiative recombination sites. Among various transition metals, an ultra‐thin zinc nitride (Zn3N2) layer on the NiOx surface is chosen to prevent these redox reactions and interfacial issues using a simple solution process at low temperatures. The redox reaction and non‐radiative recombination at the interface of the perovskite and NiOx reduce chemically by using interface modifier Zn3N2 to reduce hydroxyl group and defects on the surface of NiOx. A thin layer of Zn3N2 at the NiOx/perovskite interface results in a high Ni3+/Ni2+ ratio and a significant work function (WF), which inhibits the redox reaction and provides a highly aligned energy level with perovskite crystal and rigorous trap‐passivation ability. Consequently, Zn3N2‐modified NiOx‐based PSCs achieve a champion PCE of 21.61%, over the NiOx‐based PSCs. After Zn3N2 modification, the PSC can improve stability under several conditions.

Bi-Directional Modification to Quench Detrimental Redox Reactions and Minimize Interfacial Energy Offset for NiOX/Perovskite-Based Solar Cells

Suppressing Nickel Oxide/Perovskite Interface Redox Reaction and Defects for Highly Performed and Stable Inverted Perovskite Solar Cells

Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiOx /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells

Synergistic Effects of the Physical Modification and Chemical Passivation Enabling Efficient Perovskite Solar Cells

Boosting interfacial contact for the NiO x -based inverted perovskite solar cells via D-A type semiconductor

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Suppressing Redox Reactions at the Perovskite‐Nickel Oxide Interface with Zinc Nitride to Improve the Performance of Perovskite Solar Cells

Triple hole transporting and passivation layers for efficient NiOX-based wide-bandgap perovskite solar cells

Understanding The Heterointerfaces in Perovskite Solar Cells via Hole Selective Layer Surface Functionalization

Self-assembled hole-transport material incorporating biphosphonic acid for dual-defect passivation in NiOx-based perovskite solar cells

Interfacial Modification via Aniline Molecules with Multiple Active Sites for Performance Enhancement of n-i-p Perovskite Solar Cells

Interfacial Engineering of Nickel Oxide-Perovskite Interface with Amino Acid Complexed NiO to Improve Perovskite Solar Cell Performance

A buried interface modification strategy for enhancing the photovoltaic performance of NiOx-based inverted perovskite solar cells

Modulation on electrostatic potential to build a firm bridge at NiO x /perovskite interface for efficient and stable perovskite solar cells

Bidirectional modification of buried interface reduces energy loss for planar perovskite solar cells with efficiency > 23%

Self‐Induced Bi‐interfacial Modification via Fluoropyridinic Acid For High‐Performance Inverted Perovskite Solar Cells

Pyridine-Terminated Conjugated Organic Molecules As an Interfacial Hole Transfer Bridge for NiOx-Based Perovskite Solar Cells

Improving Buried Interface Contact by Bidentate Anchoring for Inverted Perovskite Solar Cells

Managing the Double-Edged Sword of Ni3+ in Sputter-Deposited NiOx by Interfacial Redox Reactions for Efficient Perovskite Solar Cells

Surface Property Regulation of a Magnetron-Sputtered NiOx Hole Transport Layer for High-Performance Inverted Perovskite Solar Cells

Redox-Sensitive NiOx Stabilizing Perovskite Films for High-Performance Photovoltaics