Abstract:Electrothermal actuators are highly advantageous for microelectromechanical systems (MEMS) due to their capability to generate significant force and large displacements. Despite these benefits, their application in reconfigurable conduction line switches is limited, particularly when employing commercial processes. In DC MEMS switches, electrothermal actuators require electrical insulation between the biasing voltage and the transmission line to prevent interference and maintain the integrity of the switch. This work presents a chevron-type electrothermal actuator utilizing a stack of Al thin films on a silicon (Si) structural layer beam to create a DC MEMS switch. The design leverages a thin film Al heater to drive the actuator while the layer provides electrical insulation, suppressing crosstalk with the Si layer. The electrical contact resistance of a Si-to-Si interface was evaluated by applying a controlled current and measuring the resultant voltage. A low contact resistance of 150 Ω was achieved when an initial contact gap of 2.52 μm was closed using an actuator with an actuation voltage of 1.2 V and a current of 205 mA, with a switching speed of less than 5 ms. Factors such as the contact force, the temperature, and the residual device layer etching angle significantly impact the Si-to-Si contact resistance and the switch's longevity. The switch withstands a breakdown voltage up to 350 V at its terminal contacts. Thus, it will be robust to self-actuation caused by unwanted voltage contributions, making it suitable for high-voltage and harsh environment applications.

Perforated serpentine membrane with AlN as dielectric material shunt capacitive RF MEMS switch fabrication and characterization

A laterally thermally-actuated RF MEMS capacitive switch with parylene as dielectric layer

Design and Fabrication of a Capacitive Series RF MEMS Switch

Design and Analysis of A Micromachined Capacitive Rf Shunt Switch with Composite Membrane

A Lateral RF MEMS Capacitive Switch Utilizing Parylene As Dielectric

Design and simulation of a novel RF MEMS shunt capacitive switch with low actuation voltage and high isolation

Design, optimization and simulation of a low-voltage shunt capacitive RF-MEMS switch

Novel design and analysis of RF MEMS shunt capacitive switch for radar and satellite communications

Design and Fabrication of a Low Insertion Loss Capacitive RF MEMS Switch with Novel Micro-Structures for Actuation

Design and fabrication of X-band capacitive MEMS switches

High-Isolation Contact Switch in Mems Phase Shifter

Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS Technology

An Analytical Model for High Performance Capacitive RF MEMS Switch Design

High-isolation lateral RF MEMS capacitive switch based on HfO2 dielectric for high frequency applications

Design and Fabrication of DC to 30 GHz DC-contact Shunt RF MEMS Switch

Design and Analysis of a Lateral Lateral DC-Contact MEMS RF Switch with High Performance

Design of A Novel Bulk Micro-Machined Rf Mems Switch

Laterally Actuated Si-to-Si DC MEMS Switch for Power Switching Applications

Effect of Dielectric Layer Surface Roughness on the Isolation of an RF MEMS Switch

DC-contact Series Radio-Frequency Micro Electromechanical System Switch with Slanting Beams

A Novel 3-resonance Capacitive RF MEMS Switch