Abstract:Electric arc furnace dust (EAFD) is a hazardous solid waste generated as a byproduct in the steelmaking process, containing significant amounts of zinc and iron, making it a primary secondary source of zinc. The separation of zinc and iron in an environmentally-friendly and efficient manner poses a crucial technological challenge for the safe disposal and resource utilization of EAFD, facilitating the recovery of valuable zinc and the direct reuse of iron as raw materials for ironmaking. In this study, a novel method for restructuring zinc-bearing phases into sulfated compounds through low-temperature roasting by introducing FeS in EAFD were proposed. Simultaneously, the iron-containing phases undergo a transformation into Fe 2 O 3 . Subsequently, efficient separation of zinc and iron is achieved through a leaching process using dilute sulfuric acid. The conditions for the theoretical transformation of zinc-containing phases into ZnSO 4 and iron-containing phases into Fe 2 O 3 in EAFD were determined by thermodynamic calculations incorporating FeS. The temperature range for sulfation calcination was determined to be within 550–700 °C based on TG-DSC analysis and the evaluation of SO 2 release during the decomposition of FeS. The optimal conditions for the roasting process were determined as an E/F ratio of 1:3, a temperature of 650 °C, and a duration of 3 h. In addition, the optimal conditions for the leaching process were determined as the addition of 1 mL of 1 M H 2 SO 4 and a liquid–solid ratio of 25 mL/g. Under these conditions, the extractions of Zn and Fe reached 95.33 % and 0.17 %, respectively. The mechanism of phase reconstruction from zinc-containing phases to sulfate phases in EAFD was thoroughly analyzed, revealing that the Zn species in EAFD were transformed into Zn 3 O(SO 4 ) 2 through solid–solid and gas–solid reactions, while the majority of Fe species in EAFD and FeS were converted into Fe 2 O 3 . Effective separation of zinc and iron was achieved by dissolving Zn 3 O(SO 4 ) 2 in diluted sulfuric acid while retaining Fe 2 O 3 in the residue. This study provides a fresh perspective on the recovery of zinc from zinc-containing solid waste resources, offering significant potential for the sustainable management and utilization of EAFD.

Recovery of iron from EAF smelter slags via hydrochloric acid leaching and solvent extraction using trioctyl phosphine oxide

Efficient extraction and separation of zinc and iron from electric arc furnace dust by roasting with FeSO<sub>4</sub>?7H<sub>2</sub>O followed by water leaching

Innovative Process for Strategic Metal Recovery from Electric Arc Furnace Slag by Alkaline Leaching

Selective Recovery of Iron by Solvent Extraction from Ni-Laterite Leach Solutions, as Precursor for the Synthesis of High Added-Value Nanomaterials

Separation of Iron and Calcium from a BSSF Steelmaking Slag Through Acid Leaching

Recovery of nickel and iron from ferronickel powder and high nickel matte via the atmospheric leaching-hematite precipitation process

FeS-assisted restructuring of zinc-bearing phases into sulfated compounds for efficient zinc extraction from hazardous electric furnace dust

Establishment of a Hydrometallurgical Scheme for the Recovery of Copper, Nickel, and Cobalt from Smelter Slag and Its Economic Evaluation

An unconventional approach for the efficient recovery of iron, cobalt, copper and silicon from copper slag

Comparative Study of Steel Mill Dust Leaching with Phosphoric Acid and Sodium Hydroxide

Extraction of aluminum and iron from boiler slag by sulfuric acid

Preparation of Iron Oxide Red with High Titanium Slag Recovery Dust

Optimisation of hybrid process to recover zinc from electric arc furnace dust using design of experiment approach

Combining Recovering Iron with Activating the Residual Slag Process for Electric Arc Furnace (EAF) Slag

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

A novel approach for recovery of iron from copper slag using calcium salts

Efficient extraction of phosphate from dephosphorization slag by hydrochloric acid leaching

An Innovative Technique for Comprehensive Utilization of High Aluminum Iron Ore via Pre-Reduced-Smelting Separation-Alkaline Leaching Process: Part I: Pre-Reduced-Smelting Separation to Recover Iron

Use of ferric salt solutions as leaching agents of Co, Ni, Cu, Fe, and Mn from metallic alloys of spent lithium-ion batteries and separation of iron from the leaching solution

Test Research on Separate of Iron and Recovery of Copper,Zinc From A Acidic Leaching Solution of Zinc Hydrometallurgy Slag

New EAF Slag Characterization Methodology for Strategic Metal Recovery