Abstract:Sequential leaching and extraction of precious metals from high aluminum (Al) circulating fluidized bed (CFB) fly ash in China, which associated with lithium (Li) and gallium (Ga), is one of the most significant ways for value-added utilization. However, industrial application has been limited due to serious corrosion of equipment, significant energy consumption, and complex purification processes. To sufficiently leach valuable metals from CFB fly ash, a novel energy-efficient sulfuric acid (H 2 SO 4 ) leaching process using dilution heat was developed, and the effects of iron (Fe) amount in the raw materials on the extraction process of Al, Li, and Ga as well as the as-prepared Al-based products were studied to efficiently obtain the qualified aluminum sulfate (Al 2 (SO 4 ) 3 ) products. The leaching behavior of each target element was systematically investigated by the laboratory and pilot-scale experiments. The extraction efficiencies for Al, Li, and Ga were 95.2%, 94.2%, and 87.7%, respectively, when the acid leaching process was conducted at the temperature of 140°C for 2 h, with the H 2 SO 4 concentration of 40% and the solid-to-liquid ratio of 1/3, In the Pilot-scale experiment, the temperature of the reaction system can reach 120°C, 140°C, and 160°C by regulating the amount of H 2 SO 4 added to release different heat, and efficient leaching of the target elements was achieved by the energy-efficient sulfuric acid leaching process. To obtain qualified Al 2 (SO 4 ) 3 products from fly ash, carbothermal reduction magnetic separation, and acid leaching were used for Fe removal from raw fly ash, and the Fe content in the as-prepared Al 2 (SO 4 ) 3 products was only 0.45% and 0.29%, which reached the standards of Class II qualified products and Class II first-grade products, respectively. This paper might provide an energy-efficient process for efficient and high-value utilization of solid waste fly ash.

Extraction of aluminum and iron from boiler slag by sulfuric acid

Leaching of aluminum and iron from boiler slag generated from a typical Chinese Steel Plant

An Innovative Technique for Comprehensive Utilization of High Aluminum Iron Ore via Pre-Reduced-Smelting Separation-Alkaline Leaching Process: Part I: Pre-Reduced-Smelting Separation to Recover Iron

Efficient Separation and Recovery of Vanadium, Titanium, Iron, Magnesium, and Synthesizing Anhydrite from Steel Slag

Aluminum Extraction from Coal Ash by a Two-Step Acid Leaching Method

Extraction of Aluminum from Coal Fly Ash Using Pressurized Sulfuric Acid Leaching with Emphasis on Optimization and Mechanism

A novel approach for extracting lithium from overhaul slag by low temperature roasting – water leaching

Energy-efficient leaching process for preparation of aluminum sulfate and synergistic extraction of Li and Ga from circulating fluidized bed fly ash

Separation of Iron and Calcium from a BSSF Steelmaking Slag Through Acid Leaching

Efficient extraction and separation of zinc and iron from electric arc furnace dust by roasting with FeSO<sub>4</sub>?7H<sub>2</sub>O followed by water leaching

An unconventional approach for the efficient recovery of iron, cobalt, copper and silicon from copper slag

Separation of silicon and iron in copper slag by carbothermic reduction-alkaline leaching process

A new eco-friendly approach for recovery of iron from copper smelting slag: Using CO2 and Cl2 recycling strategies

Co-extraction of Vanadium Titanium and Chromium from Vanadium Slag by Oxalic Acid Hydrothermal Leaching with Synergy of Fe Powder

A cleaner electrolysis process to recover alumina from synthetic sulfuric acid leachate of coal fly ash

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride

Cleaner and effective extraction and separation of iron from vanadium slag by carbothermic reduction-chlorination-molten salt electrolysis

Selective extraction of lithium and solidified fluoride from overhaul slag by the calcium sulfate roasting and water leaching

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

An efficient approach to utilize copper smelting slag: Separating nonferrous metals and reducing iron oxide at high temperature