Abstract:As the titanium industry rapidly develops, low-grade ilmenite resources are drawing global attention. The direct use of low-grade ilmenite can result in low production efficiency and heavy pollution. In addition, the production of high-titanium slag via electric furnace melting consumes significant energy and possesses low production efficiency. Therefore, a novel process with low energy consumption is necessary for producing ultra-grade slag (UGS) for chlorination. For low-grade ilmenite, semi-molten reduction and magnetic separation were suggested in this study. The effects of carbon content, reduction time, and Na2CO3 addition on the reduction and separation behavior were studied. The results showed that the addition of Na2CO3 favored the formation of a semi-molten state, which was more conducive for the diffusion, aggregation, and growth of the metal phase. In this regard, excess carbon was not helpful, and it weakened the growth of the metal phase. Wet grinding and magnetic separation were used for beneficiation of the reduced sample for efficiently separating the slag iron and preventing the formation of agglomerates between slag and metal. For the sample with a carbon dosage of 13 pct, Na2CO3 dosage of 8 pct, reduction temperature of 1673 K (1400 °C), and 90 minutes holding time, high-titanium slag with a TiO2 grade of 81.63 pct and iron content of 4.53 pct was produced, with the TiO2 recovery rate of 93.43 pct and the yields of 55.37 pct. High-titanium slag can be used as a high-quality raw material to produce UGS for chlorination by leaching.

Preparation of Iron Oxide Red with High Titanium Slag Recovery Dust

Recovery of titania from high titanium slag by roasting method using concentrated sulfuric acid

Preparation of nano-sized iron oxide from steel pickling liquors

Recovery of Titanium Compounds from Ti-enriched Product of Alkali Melting Ti-bearing Blast Furnace Slag by Dilute Sulfuric Acid Leaching

Fundamental Study on Utilization of Titanium Resources by RHF Process

The Recycling of Ferric Salt in Steel Pickling Liquors: Preparation of Nano-sized Iron Oxide

Experimental Study on the Preparation of High-Purity Iron Oxide Red by Acid Leaching Iron from Coal Gangue

High-Titanium Slag Preparation Process by Carbothermic Reduction of Ilmenite and Wet-Magnetic Separation

Iron removal and titanium dioxide support recovery from spent V2O5-WO3/TiO2 catalyst

A novel preparation of titanium dioxide from titanium slag

Iron Extraction from South African Ilmenite Concentrate Leaching by Hydrochloric Acid (HCl) in the Presence of Reductant (Metallic Fe) and Additive (MgSO4)

A novel process for preparation of titanium dioxide from Ti-bearing electric furnace slag: NH4HF2-HF leaching and hydrolyzing process

Research on the process and mechanism of preparing titanium-rich materials from complex ilmenite

Extraction of Valuable Metals from Titanium-bearing Blast Furnace Slag by Acid Leaching

Efficient separation of vanadium, titanium, and iron from vanadium-bearing titanomagnetite by pressurized pyrolysis of ammonium chloride-acid leaching-solvent extraction process

Selective separation of aluminum, silicon, and titanium from red mud using oxalic acid leaching, iron precipitation and pH adjustments with calcium carbonate

Recovery of Ti from titanium white waste acid with N1923 extraction and leaching of low‐grade pyrolusite using raffinate

Technological Study of Titanium Slag Production from Titanium-Bearing Blast Furnace Slag

Preparation of Red Iron by Magnetization Roasting-Hydrothermal Method Using Ultra-Low-Grade Limonite

The Preparation of High-Purity Iron (99.987%) Employing a Process of Direct Reduction–Melting Separation–Slag Refining

Synergistic Leaching of Titanium, Aluminum, and Magnesium Components during Dilute Acid Pressure Treatment of High-Titanium Blast Furnace Slag