Abstract:Hydrogen-based direct reducing iron production (H-DRI) possesses great potential for energy saving and emission reduction of greenhouse gas in metallurgical industries. Although the relevant research has been studied since long, the thermodynamics and process of reduction by pure H 2 in a broad temperature range are not well understood. Hence, we conducted a thermodynamic analysis of different iron ores (hematite and magnetite) reduced by H 2 at 300–1700 K to study the phase-composition variation with temperature. Subsequently, we explored the reduction process of iron ores by pure H 2 at 1173 K and 1673 K, respectively, to further investigate the influence of ore species and temperature on the microstructure evolution of ultimate metallic iron. The results reveal that excessive H 2 favors the transition from FeO to Fe in the last reduction step, and the magnetite achieves a higher reduction extent than hematite. Temperature above 837 K is beneficial for avoiding the occurrence of the disproportionation reaction and promoting the FeO → Fe transition to improve the reduction extent. Meanwhile, the higher volume mismatch and the associated stresses between hetero-phases at 1673 K contributed to the formation of large-size pores or cracks. The higher content of dense Fe layers formed in magnetite at relatively lower temperature served as barriers against the diffusion of O, leading to the retention of abundant closed pores in the iron matrix. The oxide impurities cannot be reduced by H 2 at 1673 K instead translated into oxide inclusions due to their low oxide-formation free energies, of which the coagulation was facilitated by increasing temperature as the higher velocity of migration and movement. With this study, we aim to provide theoretical direction for the practical application development of H-DRI.

The Preparation of High-Purity Iron (99.987%) Employing a Process of Direct Reduction–Melting Separation–Slag Refining

A novel process of reverse flotation-hydrogen reduction for preparation of high-purity iron powder with superior magnetite concentrate

Direct Electrodeposition of High-Purity Iron from Fe2O3 in Molten Calcium Chloride

Preparation of Direct Reduction Sponge Iron (DRI) Using Pyrite Cinder Containing Nonferrous Metals

Preparation of Red Iron by Magnetization Roasting-Hydrothermal Method Using Ultra-Low-Grade Limonite

Fundamental Study on Utilization of Titanium Resources by RHF Process

Preparation of high-purity reduced iron powder by Höganäs process from ultra-pure magnetite concentrate

An Innovative Technique for Comprehensive Utilization of High Aluminum Iron Ore via Pre-Reduced-Smelting Separation-Alkaline Leaching Process: Part I: Pre-Reduced-Smelting Separation to Recover Iron

Research status and prospect of high purity iron preparation

Toward environmentally friendly direct reduced iron production: A novel route of comprehensive utilization of blast furnace dust and electric arc furnace dust

Thermodynamic analysis and experimental verification of the direct reduction of iron ores with hydrogen at elevated temperature

Investigation into Recycling of Iron Oxide Scale on H13 Steel by Low‐Temperature Carbothermal Reduction Method

Phosphorus Removal and Iron Recovery from High-Phosphorus Hematite Using Direct Reduction Followed by Melting Separation

Direct reduction roasting-magnetic separation technique of a refractory iron ore

Synchronous enrichment of phosphorus and iron from a high-phosphorus oolitic hematite ore to prepare Fe-P alloy by direct reduction-magnetic separation process

Iron Recovery and Dephosphorization Behaviors from High-Phosphorus Oolitic Hematite by Gas-Based Direct Reduction and Magnetic Separation

A Laboratory Study of the Reduction of Iron Oxides by Hydrogen

An Analysis of Long-Process Ironmaking in a Reduction Smelting Furnace with Hydrogen-Enriched Conditions

Study on Phosphorus Removal of High-Phosphorus Oolitic Hematite by Coal-Based Direct Reduction and Magnetic Separation

The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales