Abstract:Iron- and steelmaking cause ∼7% of the global CO2 emissions, due to the use of carbon for the reduction of iron ores. Replacing carbon by hydrogen as the reductant offers a pathway to massively reduce these emissions. However, the production of hydrogen using renewable energy will remain as one of the bottlenecks at least during the next two decades, because making the gigantic annual crude steel production of 1.8 billion tons sustainable requires a minimum stoichiometric amount of ∼97 million tons of green hydrogen per year. Another fundamental aspect to render the ironmaking sector more sustainable lies in an optimal utilization of green hydrogen and energy, thus reducing efforts for costly in-process hydrogen recycling. We therefore demonstrate here how the efficiency in hydrogen and energy consumption during iron ore reduction can be dramatically improved by the knowledge-based combination of two technologies: partially reducing the ore at low temperature via solid-state direct reduction (DR) to a kinetically defined degree, and subsequently melting and completely transforming it to iron under a reducing plasma (i.e. via hydrogen plasma reduction, HPR). Results suggest that an optimal transition point between these two technologies occurs where their efficiency in hydrogen utilization is equal. We found that the reduction of hematite through magnetite into wüstite via DR is clean and efficient, but it gets sluggish and inefficient when iron forms at the outermost layers of the iron ore pellets. Conversely, HPR starts violent and unstable with arc delocalization, but proceeds smoothly and efficiently when processing semi-reduced oxides, an effect which might be related to the material's high electrical conductivity. We performed hybrid reduction experiments by partially reducing hematite pellets via DR at 700 °C to 38% global reduction (using a standard thermogravimetry system) and subsequently transferring them to HPR, conducted with a lean gas mixture of Ar-10%H2 in an arc-melting furnace, to achieve full conversion into liquid iron. This hybrid approach allows to exploit the specific characteristics and kinetically favourable regimes of both technologies, while simultaneously showing the potential to keep the consumption of energy and hydrogen low and improve both, process stability and furnace longevity by limiting its overexposure to plasma radiation.

The Behavior of Phosphorus in the Hydrogen‐based Direct Reduction – Smelter Ironmaking Route

The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

Direct Reduction of High-Phosphorus Oolitic Hematite: Quantifying Phosphorus Migration and Recovery

Iron Recovery and Dephosphorization Behaviors from High-Phosphorus Oolitic Hematite by Gas-Based Direct Reduction and Magnetic Separation

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales

Mechanistic insight into phosphorus migration pathways from oolitic hematite using in-situ observations during roasting and reduction process

Dephosphorization kinetics of high-P-containing reduced iron produced from oolitic hematite ore

Study on Efficient Dephosphorization in Converter Based on Thermodynamic Calculation

Phosphorus Removal and Iron Recovery from High-Phosphorus Hematite Using Direct Reduction Followed by Melting Separation

Study on Phosphorus Removal of High-Phosphorus Oolitic Hematite by Coal-Based Direct Reduction and Magnetic Separation

Dephosphorization Mechanism in a Roasting Process for Direct Reduction of High-Phosphorus Oolitic Hematite in West Hubei Province, China

Impact of Iron Ore Pre-Reduction Degree on the Hydrogen Plasma Smelting Reduction Process

Mechanism of Phosphorus Removal in Beneficiation of High Phosphorous Oolitic Hematite by Direct Reduction Roasting with Dephosphorization Agent

Effect of Calcium Compounds on Direct Reduction and Phosphorus Removal of High-Phosphorus Iron Ore

Calcium Carbonate as Dephosphorization Agent in Direct Reduction Roasting of High-Phosphorus Oolitic Iron Ore: Reaction Behavior, Iron Recovery, and Dephosphorization Mechanism

Green steel at its crossroads: Hybrid hydrogen-based reduction of iron ores

Thermodynamic analysis and experimental verification of the direct reduction of iron ores with hydrogen at elevated temperature

Advanced physical model of hydrothermic reduction of iron ore pellets by dissociated 2H+ ionic gas in the shaft furnace

Behavior of Carbothermal Dephosphorization of Phosphorus-Containing Converter Slag and Its Resource Utilization

Influence study on dephosphorization of carbon-containing high-phosphorus iron ore by microwave field

Hierarchical nature of hydrogen-based direct reduction of iron oxides