Abstract:Realizing the large-scale development and utilization of siderite, a difficult iron ore reserve, has great practical significance in ensuring the supply of iron ore resources. Therefore, a new in-house conveyor bed magnetization roasting–dry cooling process was pilot-tested using low-grade siderite from the Daxigou iron ore mine. A two-stage weak magnetic separation method was used for a beneficiation test to investigate the influence of temperature and CO content on the magnetization of siderite. At 600 °C and 800 °C under suspension, iron minerals were converted into magnetite with an effective 3–5 s residence time. Furthermore, at 600 °C and 750 °C, increasing the calcination temperature increased the iron grade and the concentrate recovery rate. However, calcination at temperatures >750 °C resulted in a slight decrease in the iron grade and recovery rate of the concentrate. 61.50% Fe grade and 80.30% concentrate recovery rate were obtained under 750 °C from magnetization roasting. Magnetization roasting in a reducing atmosphere provides mainly magnetite as the roasted ore, and increased CO content can efficiently promote this effect. At 700–780 °C and when the CO content was increased to more than 3 wt.%, the improvement of the roasting effect was very limited. Rapid cooling of the roasted ore using a mixture of circulating exhaust gas and air could prevent considerable oxidation of the magnetic ferrous material. Therefore, the preferred process conditions are 700–780 °C with a CO content range of 1–3%. It provided a concentrate iron grade of 59.27–61.50% and a recovery rate of 78.32–80.30%. The results of this study provide a reference for the development of conveyor bed magnetization technology, process design, and production control.

Preparation of Red Iron by Magnetization Roasting-Hydrothermal Method Using Ultra-Low-Grade Limonite

Enhanced iron extraction from high-phosphorus waste limonite ore via suspension magnetization roasting: A pilot-scale study

Insight of Reduction Roasting of a Low-Grade Goethitic Indian Iron Ore in a Rotary Kiln: Process Optimization and Characterization

Selective enrichment of iron from fine-grained complex limonite using suspension magnetization roasting followed by magnetic separation

Clean recycling of low-grade refractory limonitic waste using suspension magnetization roasting coupled with magnetic separation: A semi-industrial approach towards a waste utilization plan

Clean utilization of high-iron red mud by suspension magnetization roasting

An efficient and green method to separate iron and manganese from ferromanganese ore by suspension magnetization roasting and magnetic separation

Improved iron recovery from low-grade iron ore by efficient suspension magnetization roasting and magnetic separation

Recovery of iron from high-iron red mud using suspension magnetization roasting and magnetic separation

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Minerals phase transformation by hydrogen reduction technology: A new approach to recycle iron from refractory limonite for reducing carbon emissions

Study on Magnetization Roasting Kinetics of High-Iron and Low-Silicon Red Mud

The Preparation of High-Purity Iron (99.987%) Employing a Process of Direct Reduction–Melting Separation–Slag Refining

Pilot Study on a New Conveyor Bed Magnetization Roasting Process for Efficient Iron Extraction from Low-Grade Siderite

Experimental Study on the Preparation of High-Purity Iron Oxide Red by Acid Leaching Iron from Coal Gangue

Reaction behavior and non-isothermal kinetics of suspension magnetization roasting of limonite and siderite

An Novel Method for Iron Recovery from Iron Ore Tailings with Pre-Concentration Followed by Magnetization Roasting and Magnetic Separation

Producing magnetite concentrate from iron tailings via suspension magnetization roasting: A pilot-scale study

Beneficiation of an iron ore fines by magnetization roasting and magnetic separation

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Desulfurization Mechanism of Lead–Zinc-Bearing Hematite–Limonite Ore Through Oxidation Roasting Process