Abstract:The iron element in electric arc furnace (EAF) slag is extremely difficult to recycle due to the low specific magnetic susceptibility of the RO phase (a solid solution of FeO, MgO, CaO, and MnO). Landfilling EAF slag is strictly forbidden for environmental consideration because of poisonous Cr6+ leaching. The original RO phase could be transformed to a spinel structure, whose specific magnetic susceptibility is much higher than that of other minerals, through hot modification, resulting in significantly increased iron recovery by magnetic separation. Precipitation of spinel crystals encloses chromium, such that iron and chromium could be recovered simultaneously. The chromium in obtained iron concentrates is considerably useful for stainless steel making rather than polluting the environment. As a result, recovering iron and chromium is truly beneficial for cleaner production. Hot modification of EAF slag should be conducted at 1500–1600 °C for at least 60 min to guarantee homogeneous liquid slag. The liquid slag was poured onto an iron mold to obtain modified slag (MS) through air quenching. MS was characterized by thermodynamic analysis, X-ray diffraction, and scanning electron microscopy combined with energy-dispersive spectroscopy to correlate the relationship between mineral structures and iron recovery. The iron recovery rate of MS first increased and then decreased with increasing modifier. It was less than 10% when the modifier addition amount was below 12 wt.%, but it increased rapidly as the modifier addition amount increased from 16 to 24 wt.%, mainly due to spinel formation. The highest iron recovery rate was 81.9% when the modifier amount reached 20 wt.%. Meanwhile, Cr6+ was enriched in the spinel phase but was not observed in other minerals. Industrial tests were performed on-site with the modifier ranging from 12 to 18 wt.% because additional heat was not provided during the tests. Results showed that MS with 18 wt.% modifier addition exhibited an iron recovery rate of 61.0%, much higher than that (34.6%) of the original slag.

Combining Recovering Iron with Activating the Residual Slag Process for Electric Arc Furnace (EAF) Slag

Novel method for improving iron recovery from electric arc furnace slag: on-site hot modification

Advances in chemical and physical properties of electric arc furnace carbon steel slag by hot stage processing and mineral mixing

Resource utilization of slag from desulphurization and slag skimming: A comprehensive recycling process of all components

Recovery of Cu-Fe Alloy from Copper Smelting Slag

Recovery of valuable metals from electroplating sludge with reducing additives via vitrification

Efficient Separation and Recovery of Vanadium, Titanium, Iron, Magnesium, and Synthesizing Anhydrite from Steel Slag

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

Study on Separation of Iron from Waste Slag of Pyrite Processing

Analysis of the melting process of carbon-bearing pellets in iron bath, slag bath and graphite crucible

Innovative Process for Strategic Metal Recovery from Electric Arc Furnace Slag by Alkaline Leaching

Synergetic modification of industrial basic oxygen furnace slag and copper slag for efficient iron recovery

Reduction and reconstruction of vanadium-containing steel slag at high temperature

Recovery of iron from waste slag of pyrite processing using reduction roasting magnetic separation method

Application of Fly Ash from Pulp and Paper Industries as Slag Formers in Electric Arc Furnace Stainless Steel Production

New EAF Slag Characterization Methodology for Strategic Metal Recovery

Characterization of a Chromium-Bearing Carbon Steel Electric Arc Furnace Slag after Magnetic Separation to Determine the Potential for Iron and Chromium Recovery

Recovery of copper from refining slags of copper fire anode furnace by waste acid leaching and CaO roasting process

Development of Iron Recovery Technique from Steelmaking Slag by Reduction at High Temperature

Efficient extraction and separation of zinc and iron from electric arc furnace dust by roasting with FeSO<sub>4</sub>?7H<sub>2</sub>O followed by water leaching

A Thermodynamic and Experimental Assessment of the Recovery of Copper, Iron, Zinc, and Lead from Copper Slag