Abstract:Abstract Very-high-temperature gas-cooled reactors (VHTR) are being developed to provide higher thermal efficiency and high-temperature process heat. Zirconium carbide (ZrC) has been proposed as a potential coating material for TRistructural-ISOtropic (TRISO) coated fuel particles because of its excellent resistance to fission products corrosion, good thermal stability and higher mechanical strength under elevated temperatures. The integrity and performance of the ZrC coating of the TRISO particles are very important as it provides the main barrier for fission product release. Therefore, the microstructure and property evolution of ZrC coating deserve to be investigated. Fluidized-bed chemical vapor deposition (FB-CVD) has been conducted to fabricate the ZrC coating in a ZrCl4−C3H6-Ar-H2 system. The stoichiometry of ZrC was changed by controlling the feeding rate of ZrCl4 and the flow rate of C3H6. The ZrC coatings were annealed from 1700 °C to 2200 °C to study the possible changes in microstructures and temperature-dependent performances. The effect of stoichiometries on ZrC coating was studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy (Raman), and nanoindenter. Results showed that free carbon prevents grain growth under high-temperature annealing, and it reacts with ZrC1-x at higher temperatures to form pure phase ZrC. In addition, the microstructure evolution mechanism of ZrC at high temperatures was proposed.

Difference evaluation on ablation behaviors of ZrC-based and ZrB2-based UHTCs coatings

Relationship analysis on particle-coating-ablation property of UHTC coatings fabricated by plasma spray technique

Ablation behaviors of ultra-high temperature ceramic composites

Effects of ZrC particle size on ablation behavior of C/C-SiC-ZrC composites prepared by chemical liquid vapor deposition

Effect of SiC Content on the Ablation and Oxidation Behavior of ZrB2-Based Ultra High Temperature Ceramic Composites

Microstructure, surface stress and surface temperature response of ZrB2–SiC based coatings

Microstructure and anti-ablation of laser cladding Ti-Zr-B-C coating on TC11 titanium alloy

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Influences of deposition temperature, gas flow rate and ZrC content on the microstructure and anti-ablation performance of CVD-HfC-ZrC coating

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites

Ablation behavior of a network interlacing ZrC-VC ceramic coating prepared by a pioneering spillover permeation

Phase and microstructure evolutions of in-situ ZrC composite coating under plasma torch ablation

UHTC coating reinforced by HfC nanowires against ablation for C/C composites

Microstructure and Ablation Behavior of W Coating Prepared by Atmospheric Plasma Spraying for Zr/Cu Infiltrated C/C Composites

Effect of temperature-dependent nano SiC on the ablation resistance of ZrC coating

Effects of Stoichiometry and High-Temperature Annealing on Zirconium Carbide Coating Layer in TRISO Particles

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Interface stability and microstructural evolution of the (Cr/CrN)24-coated zirconium alloy under different thermal shock temperatures

Microstructure and Ablation Behavior of W/ZrC/SiC Coating on C/C Composites Prepared by Reactive Melt Infiltration and Atmospheric Plasma Spraying

Effect of tantalum carbide on the ablation behaviors of hafnium carbide coating for C/C composites under single and cyclic oxyacetylene torch environments

Ablation behaviour of the CVD-(ZrC/SiC)3 alternate coating on C/C composites under oxyacetylene torch with different heat fluxes