Abstract:Surface structures and microstructures are of vital importance to the wetting behaviors and mechanical robustness of non-wetting surfaces. In this work, yttrium oxide coatings with different surface structures and microstructures were deposited via the solution precursor plasma spray (SPPS) process, powder plasma spray (PPS) process, and a newly-developed mesh shielding PPS process. The SPPS coatings showed porous microstructures and hierarchical surface structures, and thereby presented superhydrophobic behaviors. The PPS coatings showed dense lamellar microstructures and relatively flat surface topographies, resulting in mildly hydrophobic behaviors. The PPS coatings exhibited much higher mechanical robustness and more stable hydrophobicity under physical damage as compared to the SPPS coatings. The coatings deposited via the mesh shielding PPS process showed unique surface structures of conical pillars, endowing the coating with excellent hydrophobicity and high mechanical robustness. The conical-structured coatings showed quasi-superhydrophobic behaviors, and maintained relatively consistent hydrophobicity after abrasion. The effects of the microstructures and surface structures on the wetting behaviors and mechanical robustness of different coatings were comparatively investigated. The effects of the microstructures and surface structures on the wetting behaviors and mechanical robustness of different coatings were comparatively investigated. The change of wetting behaviors of coatings after different treatments was elaborated by correlating with the surface compositions. The work showed the wetting behaviors and mechanical robustness can be manipulated by tailoring the microstructures and surface structures in plasma spray processes.

Relationship analysis on particle-coating-ablation property of UHTC coatings fabricated by plasma spray technique

Multiscale structural understanding of plasma spraying anti-ablation coating: an example of Ta-Hf-W-C ultrahigh temperature ceramics

Difference evaluation on ablation behaviors of ZrC-based and ZrB2-based UHTCs coatings

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Very low-pressure plasma-sprayed dense yttria-stabilized zirconia coatings using an axial bi-cathode plasma torch

Microstructure characterization of in-situ ZrC composite coating with graceful toughness and improved tribological properties prepared by plasma spraying

Microstructure and Ablation Behavior of W/ZrC/SiC Coating on C/C Composites Prepared by Reactive Melt Infiltration and Atmospheric Plasma Spraying

Effect of spraying ceramic powder pore structure on thermophysical properties of plasma-sprayed thermal barrier coatings

Phase and microstructure evolutions of in-situ ZrC composite coating under plasma torch ablation

Oxidation ablation resistance of ZrB2-HfB2-SiC-TaSi2 coating prepared on C/C composite surface

Preparation of Thermal Barrier Coatings by Ultrasonic Plasma Spraying

Ablation behaviour of ZrC coating by novel solid shielding/shrouded plasma spray

Study on microstructure evolution and reaction mechanism of in-flight Ti–Si–C agglomerates during reactive plasma spraying using in situ water quenching

Microstructure and Ablation Behavior of W Coating Prepared by Atmospheric Plasma Spraying for Zr/Cu Infiltrated C/C Composites

Microstructure and Properties of Al2O3-13wt.%TiO2-Reinforced CoCrFeMnNi High-Entropy Alloy Composite Coatings Prepared by Plasma Spraying

Effect of high-enthalpy atmospheric plasma spraying parameters on the mechanical and wear resistant properties of alumina ceramic coatings

Microstructure and properties of in-situ ZrB2-ZrC composite coatings by plasma spraying

Low-pressure plasma spraying of ZrB2-SiC coatings on C/C substrate by adding TaSi2

Study on the mechanism of ultra-high temperature ablation of ZrB2–SiC–TaSi2 coatings by low-pressure plasma spraying on the C/C composites

Investigations on the Nature of Ceramic Deposits in Plasma Spray–Physical Vapor Deposition

Tailoring the wetting behaviors and surface structures of yttrium oxide coatings deposited via different plasma spray processes