Abstract:Internet-of-Things (IoT) applications require nW-power current references that are robust to process, voltage and temperature (PVT) variations, to maintain the performance of IoT sensor nodes in a wide range of operating conditions. However, nA-range current references are rarely area-efficient due to the use of large gate-leakage transistors or resistors, which occupy a significant silicon area at this current level. In this paper, we introduce a nA-range constant-with-temperature (CWT) current reference, relying on a self-cascode MOSFET (SCM) biased by a four-transistor ultra-low-power voltage reference through a single-transistor buffer. The proposed reference includes a temperature coefficient (TC) calibration mechanism to maintain performance across process corners. In addition, as the proposed design relies on the body effect, it has been fabricated and measured in 0.11-$\mu$m bulk and 22-nm fully-depleted silicon-on-insulator (FD-SOI) to demonstrate feasibility in both technology types. On the one hand, the 0.11-$\mu$m design consumes a power of 16.8 nW at 1.2 V and achieves a 2.3-nA current with a line sensitivity (LS) of 2.23 %/V at 25°C and a TC of 176 ppm/°C at 1.2 V from -40 to 85°C. On the other hand, the 22-nm design consumes a power of 16.3 nW at 1.5 V and achieves a 2.5-nA current with a 1.53-%/V LS at 25°C and an 82-ppm/°C TC at 1.5 V from -40 to 85°C. Thanks to their simple architecture, the proposed references achieve a silicon area of 0.0106 mm$^2$ in 0.11 $\mu$m and 0.0026 mm$^2$ in 22 nm without compromising other figures of merit, and are thus competitive with state-of-the-art CWT references operating in the same current range.

A low‐power native NMOS‐based bandgap reference operating from −55°C to 125°C with Li‐Ion battery compatibility

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A High Precision Circuit of Bandgap Voltage Reference

A Low-Power Voltage Reference Source for Lithium Battery Protection ICs

A Sub-1-V Nanopower MOS-Only Voltage Reference

A nanopower CMOS bandgap reference with 30ppm/degree C from -30 degree C to 150 degree C.

A Low Noise Bandgap Reference Voltage Source for CMOS Temperature Sensors

A low-power NPN-based band-gap voltage reference in an ultra-wide temperature range

Ultra‐low Power Voltage Reference with 40 Μa Maximum Load Current for Passive Sensor Systems

A Subthreshold MOSFET Bandgap Reference with Ultra-Low Power Supply Voltage

A Low Voltage High Precision CMOS Bandgap Reference

A 2.5-nA Area-Efficient Temperature-Independent 176-/82-ppm/°C CMOS-Only Current Reference in 0.11-$μ$m Bulk and 22-nm FD-SOI

An Ultra-Low Power 14.6ppm/°c 1.2V Bandgap Voltage Reference with Low Leakage Sample-and-Hold Switch

A Ultra Low Power Dissipation CMOS Bandgap Reference

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

Low-power bandgap references featuring DTMOSTs

A sub-1 V 115nA 0.35μm CMOS voltage reference for ultra low-power applications

A 1.65‐nW 11.14‐ppm/°C self‐biased subthreshold CMOS voltage reference with temperature compensation circuit

A 3216 μm2 MOS-Based Temperature Sensor with a Wide Temperature Measurement Range and Linear Readout