Abstract:Reference voltage/current generation is essential to the Analog circuit design. There have been several ways to generate quality reference voltage using bandgap reference (BGR) and there are mainly two types: current mode and voltage mode. The current-mode bandgap reference (CBGR) is widely accepted in industry due to having an output voltage which is below 1 V. However, its drawbacks include a lack of proportional to absolute temperature (PTAT) current availability, a large silicon area, multiple operating points, and a large temperature coefficient (TC). In this paper, various operating points are explained in detail with diagrams. Similar to the conventional voltage mode bandgap reference (VBGR) circuits, modifications of the existing circuits with only two operating points have also been proposed. Moreover, the proposed BGR occupies a much smaller area due to eliminating the complimentary to absolute temperature (CTAT) current-generating resistor. A new self-biased opamp was introduced to operate from a 1.05 V supply, reducing systematic offset and TC of the BGR. The proposed solution has been implemented in 28 nm CMOS TSMC technology, and extraction simulations were performed to prove the robustness of the proposed circuit. The targeted mean BGR output is 500 mV, and across the industrial temperature range (−40 to 125 °C), the simulated TC is approximately 10.5 ppm/°C. The integrated output noise within the observable frequency band is 19.6 μV (rms). A 200-point Monte Carlo simulation displays a histogram with a 2.6 mV accuracy of 1.2% (±3-sigma). The proposed BGR circuit consumes 32.8 μW of power from a 1.05 V supply in a fast process and hot (125 °C) corner. It occupies a silicon area of 81 × 42 μm (including capacitors). This design can aim for use in biomedical and sensor applications.

A low-power NPN-based band-gap voltage reference in an ultra-wide temperature range

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A 3.0-V 4.2-Μa 2.23-Ppm/°c BGR with Cross-connected NPNs and Base-current Compensation

5.7 A 29nW bandgap reference circuit

A Resistorless Cmos Bandgap Reference with Low Temperature Coefficient and High Psrr

A Resistorless High-Precision Compensated CMOS Bandgap Voltage Reference.

A 2.6 ppm/°C 2.5 V Piece-Wise Compensated Bandgap Reference with Low Beta Bipolar

A 1.74 Ppm/&#x00b0;c, High PSRR Bandgap Reference with Fast Start-Up

A 3.2ppm/°C curvature-compensated bandgap reference with wide supply voltage range

A 2.6 Ppm/Degrees C 2.5 V Piece-Wise Compensated Bandgap Reference With Low Beta Bipolar

A 0.885ppm/°C digitally calibrated bandgap voltage reference with robust start-up circuit

A 82μW Mixed-Mode sub-1V Bandgap reference with 25 ppm/°C Temperature Co-efficient with Simultaneous PTAT Generation

A 10.5 ppm/°C Modified Sub-1 V Bandgap in 28 nm CMOS Technology with Only Two Operating Points

A 0.19 ppm/°C bandgap reference circuit with high-PSRR

A 2.25 ppm/°C High-Order Temperature-Segmented Compensation Bandgap Reference

A resistor-less bandgap reference with improved PTAT generator for ultra-low-power LSIs

A 0.19 Ppm/Degrees C Bandgap Reference Circuit With High-Psrr

A 2.41 ppm/°C bandgap voltage reference with second‐order curvature compensation

A Sub-1 ppm/°C Reference Voltage Source with a Wide Input Range

Curvature-Compensated Bandgap Voltage Reference with Low Temperature Coefficient