Abstract:Reference voltage/current generation is essential to the Analog circuit design. There have been several ways to generate quality reference voltage using bandgap reference (BGR) and there are mainly two types: current mode and voltage mode. The current-mode bandgap reference (CBGR) is widely accepted in industry due to having an output voltage which is below 1 V. However, its drawbacks include a lack of proportional to absolute temperature (PTAT) current availability, a large silicon area, multiple operating points, and a large temperature coefficient (TC). In this paper, various operating points are explained in detail with diagrams. Similar to the conventional voltage mode bandgap reference (VBGR) circuits, modifications of the existing circuits with only two operating points have also been proposed. Moreover, the proposed BGR occupies a much smaller area due to eliminating the complimentary to absolute temperature (CTAT) current-generating resistor. A new self-biased opamp was introduced to operate from a 1.05 V supply, reducing systematic offset and TC of the BGR. The proposed solution has been implemented in 28 nm CMOS TSMC technology, and extraction simulations were performed to prove the robustness of the proposed circuit. The targeted mean BGR output is 500 mV, and across the industrial temperature range (−40 to 125 °C), the simulated TC is approximately 10.5 ppm/°C. The integrated output noise within the observable frequency band is 19.6 μV (rms). A 200-point Monte Carlo simulation displays a histogram with a 2.6 mV accuracy of 1.2% (±3-sigma). The proposed BGR circuit consumes 32.8 μW of power from a 1.05 V supply in a fast process and hot (125 °C) corner. It occupies a silicon area of 81 × 42 μm (including capacitors). This design can aim for use in biomedical and sensor applications.

A 442.1 Nvpp, 13.07 Ppm/°c Ultra-Low Noise Bandgap Reference Circuit in 180 Nm BCD Process

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A Novel Ultra Low Noise CMOS Voltage Reference Circuit with Digital Calibration Scheme

A High Precision Circuit of Bandgap Voltage Reference

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.

A low-power NPN-based band-gap voltage reference in an ultra-wide temperature range

A 10.5 ppm/°C Modified Sub-1 V Bandgap in 28 nm CMOS Technology with Only Two Operating Points

The design of low-noise bandgap references

5.7 A 29nW bandgap reference circuit

A 3.0$\mu$Vrms, 2.4 ppm/$^{\circ}$C BGR With Feedback Coefficient Enhancement and Bowl-Shaped Curvature Compensation

A 147 Nvrms, 1.4 Ppm/°c Low Noise Bandgap Reference for MEMS Gyroscope

A 3v 110uw 3.1ppm/Degrees C Curvature-Compensated Cmos Bandgap Reference

A 3.0-V 4.2-Μa 2.23-Ppm/°c BGR with Cross-connected NPNs and Base-current Compensation

A3V 110uW 3.1ppm/°C curvature-compensated CMOS bandgap reference

Low Noise, High PSRR, High-Order Piecewise Curvature Compensated CMOS Bandgap Reference

A 2.47-10V Curvature-corrected Bandgap Reference for LDO

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A 0.885ppm/°C digitally calibrated bandgap voltage reference with robust start-up circuit

A Curvature Corrected Bandgap Reference with Mismatch Cancelling and Noise Reduction