Abstract:The proposed bandgap voltage reference (BGR) realizes the second‐order temperature compensation by adding a sum current branch and a differential current branch to the conventional low‐voltage first‐order temperature‐compensated current‐mode BGR structure. The sum‐current branch is composed of two metal‐oxide‐semiconductor (MOS) transistors, and the difference‐current branch consists of four MOS transistors, respectively. This simple low‐voltage second‐order temperature‐compensated structure achieves lower temperature coefficient (TC) than the conventional first‐order temperature‐compensated current‐mode BGR. Summary A current‐mode (CM) bandgap voltage reference (BGR) with second‐order curvature compensation is presented in this paper. The proposed CM BGR offers a simple compensation structure that requires only six additional transistors compared with traditional BGR designs, making it an attractive solution for low temperature coefficient (TC) voltage references. Proportional to absolute temperature (PTAT) current digital‐to‐analog converters (DACs) are used to suppress the effect of process variation and device mismatch on TC. The compensation signal is generated using the voltage difference of two bipolar junction transistor (BJT) emitter–bases whose currents are the sum and difference of the PTAT current and the zero to absolute temperature (ZTAT) current, respectively. The proposed CM BGR is designed with 0.18‐μm BIPOLAR CMOS DMOS process. A TC is 2.41 ppm/°C over a wide temperature range of −40°C to 150°C. The linear sensitivity of the supply voltage from 1.2 to 2 V is 0.027%/V. With an active area of 0.0721 mm2, it consumes 68 μA at room temperature. The integrated output noise from 0.1 to 10 Hz is 21.9 μV.

A 3.0$\mu$Vrms, 2.4 ppm/$^{\circ}$C BGR With Feedback Coefficient Enhancement and Bowl-Shaped Curvature Compensation

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

Design and Realization of a High Precision Low Temperature Coefficient Bandgap Voltage Reference

A High Precision Circuit of Bandgap Voltage Reference

A 3v 110uw 3.1ppm/Degrees C Curvature-Compensated Cmos Bandgap Reference

A3V 110uW 3.1ppm/°C curvature-compensated CMOS bandgap reference

A 1-V 2.69-ppm/°C 0.8-μW bandgap reference with piecewise exponential curvature compensation

A Curvature-Compensated CMOS Bandgap with Negative Feedback Technique

A 2.5 V, 2.56 ppm/°C Curvature-Compensated Bandgap Reference for High-Precision Monitoring Applications

A 14-B BW /power Scalable Sensor Interface with a Dynamic Bandgap Reference

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A High Precision Bandgap Voltage Reference with MOS Transistor Curvature Compensation in 65-Nm CMOS Process

A 0.885ppm/°C digitally calibrated bandgap voltage reference with robust start-up circuit

A 2.41 ppm/°C bandgap voltage reference with second‐order curvature compensation

A Curvature Corrected Bandgap Reference with Mismatch Cancelling and Noise Reduction

A High-Order Compensated Op-amp-less Bandgap Reference with 39 ppm/ °C over -260~125 °C Temperature Range and -50 dB PSRR

A 3.0-V 4.2-Μa 2.23-Ppm/°c BGR with Cross-connected NPNs and Base-current Compensation

A 1.8ppm/°C Low Temperature Coefficient Curvature Compensated Bandgap for the Low Voltage Application

A 147 Nvrms, 1.4 Ppm/°c Low Noise Bandgap Reference for MEMS Gyroscope