Abstract:This brief presents a simple and power-efficient impedance adapting compensation scheme for high current NMOS low-dropout regulators (LDOs). By the proposed technique, the low-frequency node impedance retains to high value, while the high-frequency impedance is greatly attenuated. Therefore, both high gain and decent transient response is achieved simultaneously. Besides, the proposed impedance adaption waived the need for a commonly required power-hungry driver circuit, leading to a more simplified and energy-efficient design. In addition, the load-tracking technique is applied to further cancel the effect of load current variations, and helps achieve decent frequency and transient responses over a wide load range. Fabricated in a 0.35 mu m CMOS process, the chip regulates an output voltage form 0.8 V to 1.8 V with 6 A current capacity and 114 mV maximum dropout voltage. The measurement results show an over-/undershoot voltages of 35.4 mV and -32.2 mV, respectively, for load transitions between 400 mA and 5A. The load and line regulations are 0.7mV/A and 0.12 mV/V, respectively, and the power supply rejections are -55 dB and -30 dB at 10 KHz and 1 MHz, respectively.

A Low-Power Voltage Reference Source for Lithium Battery Protection ICs

A Power Management IC Used for Monitoring and Protection of Li-Ion Battery Packs

Chip Design of Li-Ion Battery Charger Operating in Constant-Current/Constant-Voltage Modes

A Low-dropout Regulator with Low Quiescent Current and High Stability

Design and implementation of a multifunctional management chip for multi-cell Li-ion batteries in series

A Novel Fully On-Chip CMOS Low-Dropout Linear Regulator with Ultra Low Noise

Low Dropout Linear Regulator with No Off-Chip Capacitor and Low Power Consumption

Low-dropout regulator with no off-chip capacitor and ultra low power consumption

A Low-dropout Regulator with Unconditional Stability and Low Quiescent Current

A Sub-1-V Nanopower MOS-Only Voltage Reference

A Novel Multi-Functional Leakage Current Protector IC Design

A 1V Ultra-Low Power High Precision CMOS Voltage Reference

A Ultra Low Power Dissipation CMOS Bandgap Reference

A low‐power native NMOS‐based bandgap reference operating from −55°C to 125°C with Li‐Ion battery compatibility

A 30na Temperature-Independent CMOS Current Reference and Its Application in an LDO

A 5.5nw Voltage Reference Circuit

An Impedance Adapting Compensation Scheme for High Current NMOS LDO Design

A Low-Power, High-Stability and Capacitor-Free LDO

A sub-1 V 115nA 0.35μm CMOS voltage reference for ultra low-power applications

Ultra‐low Power Voltage Reference with 40 Μa Maximum Load Current for Passive Sensor Systems

A 1V Supply, 81nW, 800mv Bandgap Reference Voltage Circuit for Low Power Devices