Abstract:A low temperature drift curvature-compensated complementary metal oxide semiconductor (CMOS) bandgap reference is proposed. A dual-differential-pair amplifier was employed to add compensation with a high-order term of TlnT (T is the thermodynamic temperature) to the traditional 1st-order compensated bandgap. To reduce the offset of the amplifier and noise of the bandgap reference, input differential metal oxide semiconductor field-effect transistors (MOSFETs) of large size were used in the amplifier and to keep a low quiescent current, these MOSFETs all work in weak inversion. The voltage reference’s temperature curvature has been further corrected by trimming a switched resistor network. The circuit delivers an output voltage of 3 V with a low dropout regulator (LDO). The chip was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC)’s 0.35-μm CMOS process, and the temperature coefficient (TC) was measured to be only 2.1×10−6/°C over the temperature range of −40–125 °C after trimming. The power supply rejection (PSR) was −100 dB @ DC and the noise was 42 μV (rms) from 0.1 to 10 Hz.

Low-power bandgap references featuring DTMOSTs

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A High Precision Circuit of Bandgap Voltage Reference

Bandgap Voltage Reference Design with Enhanced Tolerance of Process Variations

A Low Voltage High Precision CMOS Bandgap Reference

A CMOS Bandgap Reference Circuit

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

Cmos 2.5v Bandgap Voltage Reference

Structure-Improved Low Voltage Low Power CMOS Bandgap Reference

Low Supply Bandgap Voltage Reference

A Ultra Low Power Dissipation CMOS Bandgap Reference

A CMOS bandgap reference without resistors

Design of Low Temperature Drift and Low Power Consumption CMOS Bandgap Reference with Nonlinear Compensation

A 1V Supply, 81nW, 800mv Bandgap Reference Voltage Circuit for Low Power Devices

An Ultra-Low Power 14.6ppm/°c 1.2V Bandgap Voltage Reference with Low Leakage Sample-and-Hold Switch

A 0.8V CMOS bandgap voltage reference design

CMOS 1.5V Bandgap Voltage Reference

A sub-1-V ultra-low power full CMOS bandgap reference woking in subthreshold region

A CMOS Band-Gap Voltage Reference with Low Offset

All-CMOS subbandgap reference circuit operating at low supply voltage

A Precise CMOS Bandgap Voltage Reference