Abstract:To improve printing fidelity, reducing the slice thickness to eliminate the staircase effect is of great importance for digital light processing (DLP) technology. However, using a thinner slice printing model leads to a longer total printing time in the conventional DLP approach, which significantly reduces printing efficiency. In this work, a tunable pre-curing DLP approach was developed where the relationship between the forming layer thickness and ultraviolet (UV) exposure time is theoretically analyzed, and the curing process of photo-curable solutions is divided into two sub-processes: pre-curing and further curing. In the pre-curing process, the photo-curable solution is initially pre-cured and kept at the pre-gelled state due to continuous UV exposure during subsequent DLP printing. Then, the pre-cured photo-curable solution is quickly cured to form a designed thickness in each printing cycle. Also, the UV absorbing agent is added to the photo-curable hydrogel solutions to regulate the pre-curing process. Using a 10 μm slice for DLP printing, the total printing time of the tunable pre-curing DLP is approximately 5.6% of the conventional DLP, and the staircase effect on the surface is significantly eliminated using 10 μm slice tunable pre-curing DLP approach, which leads to a better printing fidelity. Thus, both printing fidelity and efficiency are significantly and simultaneously improved by the tunable pre-curing DLP approach. Moreover, the reduction of UV exposure time and slice thickness is beneficial for cell viability during DLP bioprinting of thick bulk structures, which is demonstrated by the printing of PC12 cell-laden gelatin methacrylate (GelMA) bioinks. Using the tunable pre-curing DLP approach, the PC12 cells achieved higher cell viability (90.2 ± 6.1%) and better cell morphology than the conventional DLP approach (54.5 ± 4.8%). The tunable pre-curing DLP approach provides a promising alternative to extend the application of DLP printing greatly.

High‐Quality Translucent Alumina Ceramic Through Digital Light Processing Stereolithography Method

Fabrication and properties of alumina ceramics shaped by digital light processing as an additive manufacturing technology

Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology

Preparation of large-size alumina ceramic parts by DLP 3D printing using high-solid-loading paste and optimizing the debinding process

Polycrystalline alumina ceramic fabrication using digital stereolithographic light process

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

Study of alumina ceramic parts fabricated via DLP stereolithography using powders with different sizes and morphologies

Preparation of high performance dense Al 2 O 3 ceramics by digital light processing 3D printing technology

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Influence of resin composition on rheology and polymerization kinetics of alumina ceramic suspensions for digital light processing (DLP) additive manufacturing

Fabrication of highly transparent yttria by DLP-based additive manufacturing

Additive manufacturing of Al2O3 ceramic core with applicable microstructure and mechanical properties via digital light processing of high solid loading slurry

Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processing

Digital light processing‐based additive manufacturing of orientation‐controlled Al2O3 ceramics with improved damage tolerance

Digital light processing 3D printing of ceramic shell for precision casting

Fabrication and mechanical properties of triply period minimal surface porous alumina ceramics based on Digital Light Processing 3D printing technology

Fabrication and characterisation of ceramics via low-cost DLP 3D printing

High-resolution multiceramic additive manufacturing based on digital light processing

Reinforcement effect in printing precision and sintering performance for liquid crystal display stereolithography additive manufacturing of alumina ceramics

High-fidelity and high-efficiency additive manufacturing using tunable pre-curing digital light processing

The influences of light scattering on digital light processing high-resolution ceramic additive manufacturing