Abstract:Fused silica glasses are of great importance for applications in optics, photonics, electronics, and biochemistry. However, their harsh processing nature still constrains the design and development of fused silica glasses for advanced applications. Additive manufacturing (AM) is among the promising techniques to improve the fabrication of fused silica glasses. Herein, we develop an integrated paste printing and laser in-situ melting technology to additively manufacture fused silica glasses without post-heat-treatments. For every layer, the fused silica paste was first printed by an air-pumped dispenser based on the predesignated CAD model, and subsequently melted by a CO 2 laser to become transparent glasses. To improve the paste printing process, the shear thinning property of the developed fused silica paste was investigated to evaluate the printability of the paste, and the control strategy of the paste printing parameters was developed for precise thickness control of the printed paste layer. By optimizing the laser processing parameters, the surface waviness and roughness of the laser-melted glass layers were effectively minimized, indicating the surface uniformity was improved. To evaluate the optical properties of the laser-melted glasses, the optical transmittance and refractive indices of the fused silica glasses melted by different laser powers were characterized. Through stacking the laser-melted fused silica glasses layer-by-layer, three-dimensional (3D) fused silica glass components with unusual thin-wall structures and embedded microfluidic channels have been directly printed, demonstrating that the developed glass AM technology is promising for advanced applications such as microfluidics, integrated optics, and metamaterials.

Fabrication of highly transparent yttria by DLP-based additive manufacturing

Three-Dimensional Printing of Yttrium Oxide Transparent Ceramics via Direct Ink Writing

High‐Quality Translucent Alumina Ceramic Through Digital Light Processing Stereolithography Method

Conventional sintering of nano-crystalline Yttria-Stabilized Zirconia enables high-strength, highly translucent and opalescent dental ceramics

Achieving fabrication of highly transparent Y 2 O 3 ceramics via air pre‐sintering by deionization treatment of suspension

Densification of Yttria Transparent Ceramics: the Utilization of Activated Sintering

Effect of debinding and sintering profile on the optical properties of DLP-3D printed YAG transparent ceramic

Fabrication, microstructure, and properties of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics

Fabrication, Mechanical and Optical Performance of AM-gel Casted YAG Transparent Ceramics

Sintering and optical quality of highly transparent yb‐doped yttrium lanthanum oxide ceramics

3D Printing of Transparent Spinel Ceramics with Transmittance Approaching the Theoretical Limit

Fabrication of highly translucent yttria-stabilized zirconia ceramics using stereolithography-based additive manufacturing

DLP 3D printing of high strength semi-translucent zirconia ceramics with relatively low-loaded UV-curable formulations

Fabrication of Yb3+-Doped Yag Transparent Ceramics by Aqueous Gelcasting

Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology

FABRICATION OF TRANSPARENT YAG CERAMICS BY SOLID-STATE METHOD

Simplified Single‐Step Fabrication of Composite Transparent Ceramics

Vacuum sintering of Yb2O3 transparent ceramics: Effect of ZrO2 concentration on structural and optical properties

3D Printing of Infrared Transparent Ceramics via Material Extrusion

Hydrogel-based DLP 3D Printing of Dense Zirconia Ceramics

Direct additive manufacturing of transparent fused silica glasses using an integrated paste printing and laser in-situ melting technology