Abstract:Purpose– The purpose of this paper is to explore selective laser melting of yttria-stabilized zirconia (YSZ) ceramic by a 1 μm wavelength fibre laser; investigate the influence of different laser powers and different scanning velocities on the microstructure, the relative density, the deformation of ceramic sample and the micro-hardness; and analyze the crystal structure transformation during the fabrication.Design/methodology/approach– During the fabrication, the 5 mm × 5 mm × 5 mm YSZ ceramic samples are fabricated by rapid prototyping (RP) machine MCP Realizer SLM 250; density and microscopic photographs show the ceramic melting situation. The density of cubic sample with different laser powers and different scanning velocities is measured by Archimedes method. The microstructure of samples and powder is observed by SEM. The micro-hardness is measured by the Vickers micro-hardness equipment, and the crystal structure transition is studied by XRD.Findings– It is possible to melt YSZ powder completely with near-IR fibre laser, and the relative density of 5 mm × 5 mm × 5 mm cubic sample is 88 per cent, and the micro-hardness could reach 1,209 ± 262 HV500. The influence of laser power on the volume deformation is more sensitive than the scanning speed at the same energy density. The small pores and the obvious orderly cracks can be observed in the cross-section of sample; the uneven distribution of laser energy input is the main reason of the formation of orderly cracks. The transformation from monoclinic and cubic crystal to tetragonal crystal occurred during the melting process. Heat treatment (1400°C for 30 min) cannot significantly improve the density of the sample, but it can restore the colour of ceramic.Research limitations/implications– Particularly serious due to the deformation of the ceramic material, the authors cannot prepare a large ceramic sample and measure its macroscopic mechanical properties.Originality/value– This paper describes the manufacture of YSZ ceramic sample by SLM technology with a 1 μm wavelength fibre laser, and preliminary studies show the microscopic structure, distribution of laser parameters and crystal transformation.

Fabrication of highly translucent yttria-stabilized zirconia ceramics using stereolithography-based additive manufacturing

Investigating the effect of solid loading on microstructure, mechanical properties, and translucency of highly translucent zirconia ceramics prepared via stereolithography-based additive manufacturing

Improved Mechanical Properties of 3YSZ Ceramics Prepared by Pressure-less Sintering Assisted by Cold Sintering under Mild Conditions

Conventional sintering of nano-crystalline Yttria-Stabilized Zirconia enables high-strength, highly translucent and opalescent dental ceramics

Fabrication, microstructure, and properties of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

A Comprehensive Study on Zirconia Slurry for Stereolithography-Based Additive Manufacturing

Microstructure Study on Selective Laser Melting Yttria Stabilized Zirconia Ceramic with Near Ir Fiber Laser

Realizing near-full density monophasic tetragonal 1.5-mol% yttria-stabilized zirconia ceramics via current-ramp flash sintering

Composition, processing, and properties of biphasic zirconia bioceramics: Relationship to competing strength and optical properties

Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures

Current speed sintering and high-speed sintering protocols compromise the translucency but not strength of yttria-stabilized zirconia

Aging Resistance of Highly Translucent Zirconia Ceramics with Rapid Sintering

Manufacturing and Characterization of Dental Crowns Made of 5-mol% Yttria Stabilized Zirconia by Digital Light Processing

Characterization of Three Commercial Y-TZP Ceramics Produced for Their High-Translucency, High-Strength and High-Surface Area

Evaluation of the Effect of High-Speed Sintering and Specimen Thickness on the Properties of 5 Mol% Yttria-Stabilized Dental Zirconia Sintered Bodies

Effect of High-Speed Sintering on the Optical Properties, Microstructure, and Phase Distribution of Multilayered Zirconia Stabilized with 5 mol% Yttria

In Vitro Evaluation of Speed Sintering and Glazing Effects on the Flexural Strength and Microstructure of Highly Translucent Multilayered 5 mol% Yttria-Stabilized Zirconia

Porous Yttria‐stabilized Zirconia Ceramics Fabricated by Nonaqueous‐Based Gelcasting Process with PMMA Microsphere As Pore‐Forming Agent

Fabrication of dense YSZ ceramic via vat photopolymerization with low ceramic particles loading

Translucency and mechanical behavior of partially stabilized monolithic zirconia after staining, finishing procedures and artificial aging