Abstract:Gibbs adsorption and Zener pinning induced by MgB2 decomposition are proven to inhibit grain growth for enhancing mechanical properties and cutting processibility of Bi2Te3‐based alloys with improved thermoelectric performance. An average figure of merit of 1.1 within 300–473 K can be obtained in (Bi0.4Sb1.6Te3)0.97(MgB2)0.03, and an energy conversion efficiency of 4.2% at a temperature difference of 215 K can be achieved in an eight‐pair device. Bi2Te3‐based alloys have great market demand in miniaturized thermoelectric (TE) devices for solid‐state refrigeration and power generation. However, their poor mechanical properties increase the fabrication cost and decrease the service durability. Here, this work reports on strengthened mechanical robustness in Bi2Te3‐based alloys due to thermodynamic Gibbs adsorption and kinetic Zener pinning at grain boundaries enabled by MgB2 decomposition. These effects result in much‐refined grain size and twofold enhancement of the compressive strength and Vickers hardness in (Bi0.5Sb1.5Te3)0.97(MgB2)0.03 compared with that of traditional powder‐metallurgy‐derived Bi0.5Sb1.5Te3. High mechanical properties enable excellent cutting machinability in the MgB2‐added samples, showing no missing corners or cracks. Moreover, adding MgB2 facilitates the simultaneous optimization of electron and phonon transport for enhancing the TE figure of merit (ZT). By further optimizing the Bi/Sb ratio, the sample (Bi0.4Sb1.6Te3)0.97(MgB2)0.03 shows a maximum ZT of ≈1.3 at 350 K and an average ZT of 1.1 within 300–473 K. As a consequence, robust TE devices with an energy conversion efficiency of 4.2% at a temperature difference of 215 K are fabricated. This work paves a new way for enhancing the machinability and durability of TE materials, which is especially promising for miniature devices.

Reliable N-type Mg3.2Sb1.5Bi0.49Te0.01/304 stainless steel junction for thermoelectric applications

Interfacial Design Contributing to High Conversion Efficiency in Mg3(Sb, Bi)2/Bi2Te3 Thermoelectric Module with Superior Stability

Interface and Surface Engineering Realized High Efficiency of 13% and Improved Thermal Stability in Mg3Sb1.5Bi0.5‐Based Thermoelectric Generation Devices

Bismuth-free Mg3Sb2 with Enhanced Room-Temperature Thermoelectric and Mechanical Properties

A general design strategy for thermoelectric interface materials in n-type Mg3Sb1.5Bi0.5 single leg used in TEGs

Inhibiting Mg Diffusion and Evaporation by Forming Mg‐Rich Reservoir at Grain Boundaries Improves the Thermal Stability of N‐Type Mg3Sb2 Thermoelectrics

Screening metal diffusion barriers for thermoelectric Bi0.5Sb1.5Te3

Maximizing the performance of n-type Mg3Bi2 based materials for room-temperature power generation and thermoelectric cooling

Interface Engineering Boosting High Power Density and Conversion Efficiency in Mg2Sn0.75Ge0.25‐Based Thermoelectric Devices

Promoted application potential of p-type Mg3Sb1.5Bi0.5 for the matched thermal expansion with its n-type counterpart

Boosting room-temperature thermoelectric performance of Mg 3 Sb 1.5 Bi 0.5 material through breaking the contradiction between carrier concentration and carrier mobility

High-Performance Low-Cost n-Type Se-Doped Mg3Sb2-Based Zintl Compounds for Thermoelectric Application

Na/Bi-co-doping and Heterogeneous Interfaces Leading to Enhanced Thermoelectric Performance of P-Type Mg3Sb2-based Zintls

Gibbs Adsorption and Zener Pinning Enable Mechanically Robust High‐Performance Bi2Te3‐Based Thermoelectric Devices

Boosting Room-Temperature Thermoelectric Performance of Mg3sb1.5bi0.5 Material Through Breaking the Contradiction Between Carrier Concentration and Carrier Mobility

Band Engineering and Phonon Engineering Effectively Improve N-Type Mg3Sb2 Thermoelectric Material Properties.

Wide-temperature-range thermoelectric n-type Mg3(Sb,Bi)2 with high average and peak zT values

High‐Performance N‐type Mg3Sb2 Towards Thermoelectric Application Near Room Temperature

High thermoelectric performance and anisotropy studies of n-type Mg3Bi2-based single crystal

Scalable Synthesis of N-Type Mg3Sb2-xBix for Thermoelectric Applications

Mg3(Bi,Sb)2 single crystals towards high thermoelectric performance