Abstract:The thermoelectric performance of the p‐type Mg3Sb2‐based compound is improved by fully optimizing its carrier concentration, mobility, and lattice thermal conductivity. As a result, a unicouple comprised of p‐type Mg1.594Yb0.2Na0.006Zn1.2Sb2 and n‐type Mg3.2SbBi0.99Te0.01 is successfully constructed, and exhibits high conversion efficiency, good stability, and low cost, showing its great potential for low‐grade heat recovery. Bi2Te3‐based devices have long dominated the commercial market for thermoelectric cooling applications, but their narrow operating temperature range and high cost have limited their possible applications for conversion of low‐grade heat into electric power. The recently developed n‐type Mg3Sb2‐based compounds exhibit excellent transport properties across a wide temperature range, have low material costs, and are nontoxic, so it would be possible to substitute the conventional Bi2Te3 module with a reliable and low‐cost all‐Mg3Sb2‐based thermoelectric device if a good p‐type Mg3Sb2 material can be obtained to match its n‐type counterpart. In this study, by comprehensively regulating the carrier concentration, carrier mobility, and lattice thermal conductivity, the thermoelectric performance of p‐type Mg3Sb2 is significantly improved through Na and Yb doping in Mg1.8Zn1.2Sb2. Moreover, p‐ and n‐type Mg3Sb2 are similar in terms of their coefficients of thermal expansion and their good performance stability, thus allowing the construction of a reliable all‐Mg3Sb2‐based unicouple. The decent conversion efficiency (≈5.5% at the hot‐side temperature of 573 K), good performance stability, and low cost of this unicouple effectively promote the practical application of Mg3Sb2‐based thermoelectric generators for low‐grade heat recovery.

High-Performance Low-Cost n-Type Se-Doped Mg3Sb2-Based Zintl Compounds for Thermoelectric Application

Advances in Thermoelectric Mg3Sb2 and Its Derivatives

High‐Performance N‐type Mg3Sb2 Towards Thermoelectric Application Near Room Temperature

Revelation of Inherently High Mobility Enables Mg3Sb2 As a Sustainable Alternative to N‐bi2te3 Thermoelectrics

Optimization of Thermoelectric Property of n‐Type Mg3Sb2 Near Room Temperature via Mn&Se Co‐Doping

Efficient Mg2Si0.3Sn0.7 Thermoelectrics Demonstrated for Recovering Heat of about 600 K

Electrical property enhancement and lattice thermal conductivity reduction of n-type Mg3Sb1.5Bi0.5-based Zintl compound by In&Se co-doping

High-Performance Mg<sub>3</sub>Sb<sub>2-<i>x</i></sub>Bi<i><sub>x</sub></i> Thermoelectrics: Progress and Perspective

Na/Bi-co-doping and Heterogeneous Interfaces Leading to Enhanced Thermoelectric Performance of P-Type Mg3Sb2-based Zintls

High Thermoelectric Performance at Room Temperature of N-Type Mg 3 Bi 2 -Based Materials by Se Doping

High thermoelectric performance and anisotropy studies of n-type Mg3Bi2-based single crystal

High thermoelectric performance at room temperature of n-type Mg3Bi2-based materials by Se doping

Band Engineering and Phonon Engineering Effectively Improve N-Type Mg3Sb2 Thermoelectric Material Properties.

Enhanced Thermoelectric Performance of p‐Type Mg3Sb2 for Reliable and Low‐Cost all‐Mg3Sb2‐Based Thermoelectric Low‐Grade Heat Recovery

Extraordinary Thermoelectric Performance in N-Type Manganese Doped Mg3Sb2 Zintl: High Band Degeneracy, Tuned Carrier Scattering Mechanism and Hierarchical Microstructure

Enhanced Thermoelectric Performance in P-Type Mg 3 Sb 2 Via Lithium Doping

Boosting Room-Temperature Thermoelectric Performance of Mg3sb1.5bi0.5 Material Through Breaking the Contradiction Between Carrier Concentration and Carrier Mobility

Boosting room-temperature thermoelectric performance of Mg 3 Sb 1.5 Bi 0.5 material through breaking the contradiction between carrier concentration and carrier mobility

Bismuth-free Mg3Sb2 with Enhanced Room-Temperature Thermoelectric and Mechanical Properties

Bi8Se7: Delocalized Interlayer π-Bond Interactions Enhancing Carrier Mobility and Thermoelectric Performance near Room Temperature

Theoretical Study on Thermoelectric Performance of N-Type Mg-3 (Sb,Bi)(2) Single Crystal for Cooling or Power Generation