Abstract:An Mg compensating strategy is proposed to realize highвАРperformance nвАРtype Mg3(Bi, Sb)2 thermoelectric alloys by the meltingвАРsintering approach, reaching peak ZTвЙИ1.55 at 723 K, and average ZT вЙИ1.25 within 323вАУ723 K. This strategy can also be used to obtain nвАРtype Mg3(Bi, Sb)2/Fe legs by a oneвАРstep sintering process, displaying low interfacial contact resistivity, and improved thermal stability. NвАРtype Mg3(Bi, Sb)2вАРbased thermoelectric (TE) alloys show great promise for solidвАРstate power generation and refrigeration, owing to their excellent figureвАРofвАРmerit (ZT) and using cheap Mg. However, their rigorous preparation conditions and poor thermal stability limit their largeвАРscale applications. Here, this work¬†develops an Mg compensating strategy to realize nвАРtype Mg3(Bi, Sb)2 by a facile meltingвАРsintering approach. "2D roadmaps" of TE parameters versus sintering temperature and time are plotted to understand the MgвАРvacancyвАРformation and MgвАРdiffusion mechanisms. Under this guidance, high weight mobility of 347 cm2¬†VвИТ1¬†sвИТ1 and power factor of 34 ¬μW¬†cmвИТ1¬†KвИТ2 can be obtained for Mg3.05Bi1.99Te0.01, and a peak ZTвЙИ1.55 at 723 K and average ZTвЙИ1.25 within 323вАУ723 K can be obtained for Mg3.05(Sb0.75Bi0.25)1.99Te0.01. Moreover, this Mg compensating strategy can also improve the interfacial connecting and thermal stability of corresponding Mg3(Bi, Sb)2/Fe TE legs. As a consequence, this work¬†fabricates an 8вАРpair Mg3Sb2вАРGeTeвАРbased powerвАРgeneration device reaching an energy conversion efficiency of вЙИ5.0% at a temperature difference of 439 K, and a oneвАРpair Mg3Sb2вАРBi2Te3вАРbased cooling device reaching вИТ10.7¬†¬∞C at the cold side. This work paves a facile way to obtain Mg3Sb2вАРbased TE devices at low cost and also provides a guide to optimize the offвАРstoichiometric defects in other TE materials.

A general design strategy for thermoelectric interface materials in n-type Mg3Sb1.5Bi0.5 single leg used in TEGs

Interface and Surface Engineering Realized High Efficiency of 13% and Improved Thermal Stability in Mg3Sb1.5Bi0.5‐Based Thermoelectric Generation Devices

Interface Engineering Boosting High Power Density and Conversion Efficiency in Mg2Sn0.75Ge0.25‐Based Thermoelectric Devices

Interfacial Design Contributing to High Conversion Efficiency in Mg3(Sb, Bi)2/Bi2Te3 Thermoelectric Module with Superior Stability

Ni barrier in Bi2Te3-based thermoelectric modules for reduced contact resistance and enhanced power generation properties

Mg Compensating Design in the MeltingвАРSintering Method For HighвАРPerformance Mg3(Bi, Sb)2 Thermoelectric Devices

Mechanical Compatibility between Mg3(Sb,Bi)2 and MgAgSb in Thermoelectric Modules

Gibbs Adsorption and Zener Pinning Enable Mechanically Robust High‐Performance Bi2Te3‐Based Thermoelectric Devices

High thermoelectric performance and anisotropy studies of n-type Mg3Bi2-based single crystal

Reliable N-type Mg3.2Sb1.5Bi0.49Te0.01/304 stainless steel junction for thermoelectric applications

Maximizing the performance of n-type Mg3Bi2 based materials for room-temperature power generation and thermoelectric cooling

Improvement of Contact and Bonding Performance of Mg2Si/Mg2SiNi3 Thermoelectric Joints by Optimizing the Concentration Gradient of Mg

One‐Step‐Sintered GeTe‐Bi2Te3 Segmented Thermoelectric Legs with Robust Interface‐Connection Performance

High‐Performance Industrial‐Grade p‐Type (Bi,Sb)2Te3 Thermoelectric Enabled by a Stepwise Optimization Strategy

Boosting room-temperature thermoelectric performance of Mg 3 Sb 1.5 Bi 0.5 material through breaking the contradiction between carrier concentration and carrier mobility

Thermoelectric interface materials: A perspective to the challenge of thermoelectric power generation module

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties

Inhibiting Mg Diffusion and Evaporation by Forming Mg‐Rich Reservoir at Grain Boundaries Improves the Thermal Stability of N‐Type Mg3Sb2 Thermoelectrics

High-Performance Mg<sub>3</sub>Sb<sub>2-<i>x</i></sub>Bi<i><sub>x</sub></i> Thermoelectrics: Progress and Perspective

Developing Contacting Solutions for Mg2Si1- xSn x-Based Thermoelectric Generators: Cu and Ni45Cu55 as Potential Contacting Electrodes

High performance of Bi2Te3-based thermoelectric generator owing to pressure in fabrication process