Abstract:Herein, in situ formed MgCuSb nanoprecipitates are homogeneously distributed in the MgAgSb matrix to optimize power factor with the effect of carrier injection. As a result, a record‐high average power factor PFave of 27.2 μW cm−1 K−2 is obtained in MgCu0.1Ag0.87Sb0.99 composite and a record output power density of 2.9 W cm−2 is achieved for an eight‐pair Mg‐based TE module. Sustained thermoelectric efforts have concentrated on the enhancement of conversion efficiency of power generators, while simultaneously achieving high output power continues to lag. Specifically, the highest output power density of emerging Mg‐based modules reported so far is only half of that of commercial Bi2Te3‐based, mainly due to the low power factor of MgAgSb. Herein, homogenously distributed MgCuSb in situ nanoprecipitates in the MgAgSb matrix effectively optimized carrier concentration due to the effect of carrier injection from the metal–semiconductor Ohmic contact. As a result, a record‐high average power factor of 27.2 μW cm−1 K−2 is obtained in MgCu0.1Ag0.87Sb0.99 composite within the temperature range of 300–550 K, which is much higher than ever reported values of MgAgSb system. Benefiting from the combination of the optimized average power factor of p‐leg and low interface resistivity, a fabricated eight‐pair MgCu0.1Ag0.87Sb0.99/Mg3.2Bi1.5Sb0.5 module demonstrates an unprecedently high output power density of 2.9 W cm−2 under a temperature difference of 300 K, outperforming all low‐temperature advanced thermoelectric modules. Meanwhile, a competitive conversion efficiency of 7.65% is obtained simultaneously. The work significantly advances high‐power thermoelectric applications of Mg‐based modules in the field of low‐temperature sustainable energy harvesting.

Interfacial Design Contributing to High Conversion Efficiency in Mg3(Sb, Bi)2/Bi2Te3 Thermoelectric Module with Superior Stability

Interface and Surface Engineering Realized High Efficiency of 13% and Improved Thermal Stability in Mg3Sb1.5Bi0.5‐Based Thermoelectric Generation Devices

Realizing an Excellent Conversion Efficiency of 14.5% in the Mg3Sb2/GeTe-based Thermoelectric Module for Waste Heat Recovery

All‐Mg3Sb2‐Based Module for Thermoelectric Power Generation

High thermoelectric performance and anisotropy studies of n-type Mg3Bi2-based single crystal

Maximizing the performance of n-type Mg3Bi2 based materials for room-temperature power generation and thermoelectric cooling

Realizing High-Efficiency Thermoelectric Module by Suppressing Donor-Like Effect and Improving Preferred Orientation in N-Type Bi2(Te, Se)3

High‐Efficiency Thermoelectric Module Based on High‐Performance Bi0.42Sb1.58Te3 Materials

Interface Engineering Boosting High Power Density and Conversion Efficiency in Mg2Sn0.75Ge0.25‐Based Thermoelectric Devices

Na/Bi-co-doping and Heterogeneous Interfaces Leading to Enhanced Thermoelectric Performance of P-Type Mg3Sb2-based Zintls

Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres

Next-generation thermoelectric cooling modules based on high-performance Mg3(Bi,Sb)2 material

Realizing Ultrahigh Conversion Efficiency of ≈9.0% in YbCd2Sb2/Mg3Sb2 Zintl Module for Thermoelectric Power Generation

Reliable N-type Mg3.2Sb1.5Bi0.49Te0.01/304 stainless steel junction for thermoelectric applications

Bi2Te3-Based Thermoelectric Modules for Efficient and Reliable Low-Grade Heat Recovery

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties

Boosting room-temperature thermoelectric performance of Mg 3 Sb 1.5 Bi 0.5 material through breaking the contradiction between carrier concentration and carrier mobility

Effect of Composition Adjustment on the Thermoelectric Properties of Mg3Bi2-Based Thermoelectric Materials

Semiconductor–Semimetal Composite Engineering Enabling Record‐High Thermoelectric Power Density for Low‐Temperature Energy Harvesting

Inhibiting Mg Diffusion and Evaporation by Forming Mg‐Rich Reservoir at Grain Boundaries Improves the Thermal Stability of N‐Type Mg3Sb2 Thermoelectrics

Boosting Room-Temperature Thermoelectric Performance of Mg3sb1.5bi0.5 Material Through Breaking the Contradiction Between Carrier Concentration and Carrier Mobility