Abstract:H doping can enhance the performance of ZnO thin-film transistors (TFTs) to a certain extent, and the design of double active layers is an effective way to further improve a device’s performance. However, there are few studies on the combination of these two strategies. We fabricated TFTs with ZnO:H (4 nm)/ZnO (20 nm) double active layers by magnetron sputtering at room temperature, and studied the effect of the hydrogen flow ratio on the devices’ performance. ZnO:H/ZnO-TFT has the best overall performance when H2/(Ar + H2) = 0.13% with a mobility of 12.10 cm2/Vs, an on/off current ratio of 2.32 × 107, a subthreshold swing of 0.67 V/Dec, and a threshold voltage of 1.68 V, which is significantly better than the performance of single active layer ZnO:H-TFTs. This exhibits that the transport mechanism of carriers in double active layer devices is more complicated. On one hand, increasing the hydrogen flow ratio can more effectively suppress the oxygen-related defect states, thus reducing the carrier scattering and increasing the carrier concentration. On the other hand, the energy band analysis shows that electrons accumulate at the interface of the ZnO layer close to the ZnO:H layer, providing an additional path for carrier transport. Our research exhibits that the combination of a simple hydrogen doping process and double active layer construction can achieve the fabrication of high-performance ZnO-based TFTs, and that the whole room temperature process also provides important reference value for the subsequent development of flexible devices.

A Novel Strategy to Achieve High-Performance Titanium-Doped InZnO Thin-Film Transistors Using Atomic Layer Deposition

Effect of Titanium Cation Doping on the Performance of In2O3 Thin Film Transistors Grown via Atomic Layer Deposition

Titanium Doped Zinc Oxide Thin Film Transistors Fabricated by Cosputtering Technique

High Performance Ti-Doped ZnO TFTs with AZO/TZO Heterojunction S/D Contacts

Exploring the Potential of InCp Precursor in Plasma-Enhanced Atomic Layer Deposition for High-Performance IZO-TFTs

Effects of various oxygen partial pressures on Ti-doped ZnO thin film transistors fabricated on flexible plastic substrate

Titanium doped Zinc-oxide based Thin Film Transistors: Optimization of the source/drain materials

Performance improvement of tin-doped zinc oxide thin-film transistor by novel channel modulation layer of indium tin oxide/tin zinc oxide

Performance Enhancement of TiZO Thin Film Transistors by Introducing a Thin ITO Interlayer

High-Performance Thin-Film Transistors with ZnO/Al2O3 Superlattice Channel Fabricated by Atomic Layer Deposition

High‐Performance Thin‐Film Transistors with Nickel‐Doped Indium Zinc Oxide Channel Layers

High-Performance InTiZnO Thin-Film Transistors Deposited by Magnetron Sputtering

Thin Film Transistors Based on In-Zn-Ti-O Oxide Channel Layer

Simultaneous Enhancement of Electrical Performance and Stability of Zinc-Tin-oxide Thin-Film Transistors by Tantalum Doping

High-Performance Thin-Film Transistors with ZnO:H/ZnO Double Active Layers Fabricated at Room Temperature

High-performance Ti-doped zinc oxide TFTs with double-layer gate dielectric fabricated at low temperature

Atomic Layer Deposition Deposited Al-Doped ZnO Films for Transistor Application

Effect of Al Doping on Performance of ZnO Thin Film Transistors

InZnTiON Channel Layer for Highly Stable Thin-Film Transistors and Light-Emitting Transistors

High-Performance ZnO Thin-Film Transistors Prepared by Atomic Layer Deposition

Improving Performance of Tin-Doped-Zinc-Oxide Thin-Film Transistors by Optimizing Channel Structure