Abstract:H doping can enhance the performance of ZnO thin-film transistors (TFTs) to a certain extent, and the design of double active layers is an effective way to further improve a device’s performance. However, there are few studies on the combination of these two strategies. We fabricated TFTs with ZnO:H (4 nm)/ZnO (20 nm) double active layers by magnetron sputtering at room temperature, and studied the effect of the hydrogen flow ratio on the devices’ performance. ZnO:H/ZnO-TFT has the best overall performance when H2/(Ar + H2) = 0.13% with a mobility of 12.10 cm2/Vs, an on/off current ratio of 2.32 × 107, a subthreshold swing of 0.67 V/Dec, and a threshold voltage of 1.68 V, which is significantly better than the performance of single active layer ZnO:H-TFTs. This exhibits that the transport mechanism of carriers in double active layer devices is more complicated. On one hand, increasing the hydrogen flow ratio can more effectively suppress the oxygen-related defect states, thus reducing the carrier scattering and increasing the carrier concentration. On the other hand, the energy band analysis shows that electrons accumulate at the interface of the ZnO layer close to the ZnO:H layer, providing an additional path for carrier transport. Our research exhibits that the combination of a simple hydrogen doping process and double active layer construction can achieve the fabrication of high-performance ZnO-based TFTs, and that the whole room temperature process also provides important reference value for the subsequent development of flexible devices.

High Performance Ti-Doped ZnO TFTs with AZO/TZO Heterojunction S/D Contacts

Enhanced Performance of A-Igzo Thin-Film Transistors by Forming AZO/IGZO Heterojunction Source/drain Contacts

Sn-Doped Zno Thin-Film Transistors with Azo, Tzo and Al Heterojunction Source/Drain Contacts

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

Effect of Al Doping on Performance of ZnO Thin Film Transistors

High-Performance Flexible Tin-Zinc-Oxide Thin-Film Transistors Fabricated on Plastic Substrates

Performance enhancement of ATZO TFTs by component control and post treatment

High Performance Aluminum-Doped Zno Thin Film Transistors with High-K Gate Dielectrics Fabricated at Low Temperature

Titanium doped Zinc-oxide based Thin Film Transistors: Optimization of the source/drain materials

A Novel Strategy to Achieve High-Performance Titanium-Doped InZnO Thin-Film Transistors Using Atomic Layer Deposition

High-performance Al-Zn-O Thin-Film Transistors Sputtering at Different Power

Simultaneous Enhancement of Electrical Performance and Stability of Zinc-Tin-oxide Thin-Film Transistors by Tantalum Doping

Titanium Doped Zinc Oxide Thin Film Transistors Fabricated by Cosputtering Technique

Al-Doped Zno Thin-Film Transistors on Flexible Plastic Substrate

Atomic Layer Deposition of Al-Doped ZnO Contacts for ZnO Thin-Film Transistors

High-Performance InTiZnO Thin-Film Transistors Deposited by Magnetron Sputtering

High-Performance Al–Sn–Zn–O Thin-Film Transistor with a Quasi-Double-Channel Structure

Performances Of Thin Film Transistors With Ga-Doped Zno Source And Drain Electrodes

Performance improvement of tin-doped zinc oxide thin-film transistor by novel channel modulation layer of indium tin oxide/tin zinc oxide

Fully transparent flexible tin-doped zinc oxide thin film transistors fabricated on plastic substrate

High-Performance Thin-Film Transistors with ZnO:H/ZnO Double Active Layers Fabricated at Room Temperature