Abstract:The higher voltage blocking capability and faster switching speed of silicon-carbide (SiC) mosfets have the potential to replace Si insulated gate bipolar transistors (IGBTs) in medium-low-voltage and high-power applications. In this paper, a state-of-the-art commercially available 325 A, 1700 V SiC mosfet module has been fully characterized under various load currents, bus voltages, and gate resistors to reveal their switching capability. Meanwhile, Si IGBT modules with similar power ratings are also tested under the same conditions. From the test results, several interesting points have been obtained: different to the Si IGBT module, the over-shoot current of the SiC mosfet module increases linearly with the increase of the load current and it has been explained by a model of the over-shoot current proposed in this paper; the induced negative gate voltage due to the complementary device turn-off (crosstalk effect) is more harmful to the SiC mosfet module than the induced positive gate voltage during turn-on when the gate off-voltage is 6 V; the maximum dvdt and didt (electromagnetic interference) during switching transients of the SiC mosfet module are close to those of the Si IGBT module when the gate resistance is larger than 8 but the switching loss of the SiC mosfet module is much smaller; the switching losses of the Si IGBT module are greater than those of the SiC mosfet module even when the gate resistance of the former is reduced to zero. An accurate power loss model, which is suitable for a three-phase two-level converter based on SiC mosfet modules considering the power loss of the parasitic capacitance, has been presented and verified in this paper. From the model, a 96.2 efficiency can be achieved at the switching frequency of 80kHz and the power of 100 kW.

SiC MOSFETs - the Inevitable Trend for 800V Electric Vehicle Air Conditioning Compressors

Technical approaches towards ultra-high power density SiC inverter in electric vehicle applications

Comparative Study on Reliability and Application Features of SiC MOSFET

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

Comprehensive Comparison Between Silicon Carbide MOSFETs and Silicon IGBTs Based Traction Systems for Electric Vehicles

Applications and challenges of Silicon Carbide (SiC) MOSFET technology in electric vehicle propulsion systems: A review

Design of Heat Sink for Electric Vehicle SiC MOSFET Air-cooled Inverter

A High Efficiency Two-Stage ZVS AC/DC Converter with All SiC MOSFET

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

Junction Temperature Estimation of a SiC MOSFET Module for 800V High-Voltage Application in Electric Vehicles

Comprehensive Comparison Between Sic-mosfets and Si-igbts Based Electric Vehicle Traction Systems under Low Speed and Light Load

Analysis and Suppression of Common Mode Voltage for SiC Inverters in Electric Vehicle Applications

15 Kv SiC MOSFET: an Enabling Technology for Medium Voltage Solid State Transformers

Comparing the State-of-the-Art SiC MOSFETs: Test results reveal characteristics of four major manufacturers? 900-V and 1.2-kV SiC devices

A Design Investigation of A 1 MVA SiC MOSFET Medium Voltage Variable Frequency Drive with Various Filtering Options

Heat spreading performance of SiC-based power module with bonded vapour chamber for electric powertrain integration

A SiC-Based Liquid-Cooled Electric Vehicle Traction Inverter Operating at High Ambient Temperature

Extreme High Efficiency Enabled by Silicon Carbide (sic) Power Devices

Recent progress of SiC power devices and applications

Performance Evaluation of High-Power SiC MOSFET Modules in Comparison to Si IGBT Modules