Abstract:As the enhanced acceleration performance of electric vehicles demands improved mileage capabilities, 3D packaging is a promising solution for developing high-power-density SiC power modules. However, 3D pack-aging causes instability owing to the increased heat flux and heat dissipation inside the power module. Thus, this paper proposes an ultra-thermostable embedded liquid cooling strategy for the thermal management of SiC 3D packaging power modules in electric vehicles. We constructed an embedded micro pin-fin (E-MPF) with non-uniform density in the SiC substrate to mount the SiC Schottky barrier diodes (SBDs). The thermostability and temperature uniformity of the SiC 3D packaging power modules containing E-MPF SiC and direct bond copper (DBC) substrates were verified. The results revealed that the SiC SBDs mounted on the E-MPF SiC substrate could stably operate up to a total power dissipation of 320 W at a 100 mL/min coolant (water) flow rate, whereas those attached on the DBC substrate could be operated only under 144 W (operation terminated at a maximum junction temperature of 175 celcius). Furthermore, the junction-to-coolant thermal resistance of the E-MPF SiC substrate could be reduced by 78.89 % compared to that of the DBC substrate. Moreover, the prepared 3D stacking package effectively improved the temperature uniformity of the SiC power modules by 68.69 %. The presented ultra-thermostable E-MPF substrate SiC power module can steadily render a motor torque elevation that is one magnitude greater than that required for sustaining the boiling-free condition on the DBC substrate. This embedded liquid-cooling architecture affords a feasible solution for the thermal management of upcoming high-power electric vehicle SiC inverters.

Design of Heat Sink for Electric Vehicle SiC MOSFET Air-cooled Inverter

Water Cooling System Design and Thermal Analysis for Electrical Vehicle Driving Motors

Design of High Efficiency Inverter with Air Cooling for Electric Vehicle

Analytical Modeling of Forced-Air Cooling Heatsink by Considering Air Temperature Rise in Channel and Coupling of Multiple Heat Sources

Technical approaches towards ultra-high power density SiC inverter in electric vehicle applications

Stepwise Design Methodology and Heterogeneous Integration Routine of Air-Cooled SiC Inverter for Electric Vehicle

Nature Convection Heatsink Modeling and Optimization Based on Nusselt Number Correlation

High Temperature Direct Double Side Cooled Inverter Module for Hybrid Electric Vehicle Application

A SiC-Based Liquid-Cooled Electric Vehicle Traction Inverter Operating at High Ambient Temperature

A 380 V/50 Kvar SiC-SVG Achieving a Power Density of 1.652 Kvar/l with the Optimization of Heatsink and Output Filter Volume

SiC MOSFETs - the Inevitable Trend for 800V Electric Vehicle Air Conditioning Compressors

Heat Dissipation Characteristics of IGBT Module Based on Flow-Solid Coupling

Design of Ac/dc Converter for Bidirectional On-Board Battery Charger with Minimizing the Amount of SiC MOSFET

Design and evaluation of press-pack SiC MOSFET

Analytical Modeling of Air-Cooling System for Multiple Discrete Device Parallel Converter

Compact Inverter Designed for High-Temperature Operation

Heat spreading performance of SiC-based power module with bonded vapour chamber for electric powertrain integration

A 100kW Forced-Air-Cooled SiC MOSFET Converter Achieving a Power Density of 1.657kW/L and an Efficiency over 98.5%

An Innovative Additively Manufactured Design Concept of a Dual-Sided Cooling System for SiC Automotive Inverters

Ultra-thermostable Embedded Liquid Cooling in SiC 3D Packaging Power Modules of Electric Vehicles

Highly thermal conductive graphene-based heatsink tailored for electric propulsion SiC-based inverter