Abstract:Fuel cell technology is continuously gaining ground in E-mobility applications. Fuel cells require a constant supply of pressurized air, for which high-speed turbo compressors with air bearings are an optimal choice to reduce size, guarantee oil-free operation required for the lifetime of the fuel cell, and increase efficiency. However, the inverter driving the electric motor of the turbo compressor does not scale down with increasing speed; therefore, other technology advances are required to achieve an overall compressor system with low weight. New power electronic topologies (double-bridge voltage sources inverter), cutting edge power semiconductor technology (gallium nitride), and multiobjective optimization techniques allow reducing the inverter size, increasing inverter efficiency, and improving the output current quality and in return lowering the losses in the electric motor. This enables the electrical, mechanical, and thermal integration of the inverter into the compressor housing of very high-speed and compact turbo compressors, thereby reducing the size and weight of the overall compressor system by a factor of two. Furthermore, a turbo compressor with an integrated inverter reduces complexity and cost for operators with savings in casing, cables, coolant piping, and connectors and reduces EMI noise by shielding the high-frequency motor currents with one housing. Beside its main application for fuel cell air supply, the advantages gained by an integrated inverter can also be used in other boosting and air handling applications such as advanced air and exhaust handling in combustion engines. The proposed integration concept is verified with a 280,000 rpm, 1 kW turbo compressor, targeted for the Balance of Plant (BoP) of a 5–15 kW fuel cell. The experimental results show that the temperature limits on the power electronics parts can be kept below the limit of 90 °C up to a coolant temperature of 55 °C, and beside the advantage of lower cabling effort, the efficiency of the compressor system (turbo compressor and integrated inverter) is increased by 5.5% compared to a turbo compressor without an integrated inverter.

Compact Inverter Designed for High-Temperature Operation

High Temperature Direct Double Side Cooled Inverter Module for Hybrid Electric Vehicle Application

High performance cooling system for automotive inverters

Thermal Performance Evaluation of 1500-VDC Photovoltaic Inverters under Constant Power Generation Operation

Technical approaches towards ultra-high power density SiC inverter in electric vehicle applications

Design of High Efficiency Inverter with Air Cooling for Electric Vehicle

Real Field Mission Profile Oriented Design of a SiC-based PV-inverter Application

A SiC-Based Liquid-Cooled Electric Vehicle Traction Inverter Operating at High Ambient Temperature

Mission Profile Based Multi-Disciplinary Analysis of Power Modules in Single-Phase Transformerless Photovoltaic Inverters

Stepwise Design Methodology and Heterogeneous Integration Routine of Air-Cooled SiC Inverter for Electric Vehicle

An Innovative Additively Manufactured Design Concept of a Dual-Sided Cooling System for SiC Automotive Inverters

Electrothermal-Control Co-Design of an All Silicon Carbide 2×250 kW Dual Inverter for Heavy-Duty Traction Applications

High power SiC inverter module packaging solutions for junction temperature over 220°C

Design of Heat Sink for Electric Vehicle SiC MOSFET Air-cooled Inverter

A Thorough Review of Cooling Concepts and Thermal Management Techniques for Automotive WBG Inverters: Topology, Technology and Integration Level

A 380 V/50 Kvar SiC-SVG Achieving a Power Density of 1.652 Kvar/l with the Optimization of Heatsink and Output Filter Volume

Long-Lifetime Power Inverter for Photovoltaic AC Modules

Novel High-Speed Turbo Compressor With Integrated Inverter for Fuel Cell Air Supply

Design and Implementation of the Compact Main Circuit of IGBT-based Converter

Lifetime Evaluation of Three-Level Inverters for 1500-V Photovoltaic Systems

Direct Phase-Change Cooling of Vapor Chamber Integrated With IGBT Power Electronic Module for Automotive Application