Abstract:The joining of C f /C composite to Mo30Cu alloy plays an important practical role in a bias filter for thermonuclear fusion. In this study, the C f /C composite is joined to Mo30Cu alloy at 860 °C/10 min using AgCu4.5Ti braze after fabricating the three dimensional (3D) heat transfer interface along the C f /C interface. The effect of interface grooving on the thermal conductivity of the joint is investigated and compared with the original brazed joint. The results demonstrate that the room temperature thermal conductivity of the joint reached a maximum of 132 W·m −1 ·K −1 at a grooving depth of 200 μm, which is 17.8 % higher than that of the original joint (112 W·m −1 ·K −1 ). The thermal conductivity of the joint is still as high as 100 W·m −1 ·K −1 at a temperature of 500 °C. The excellent high-temperature thermal conductivity significantly reduces the C f /C damage and extends the service life of the joint. And the shear strength of the joint has also been significantly increased by 252 % from 13.1 MPa to 33.1 MPa. Grooves prepared along the C f /C interface provide channels for braze penetration, increasing the contact area between the brazing seam and the C f /C matrix. Ultimately, the thermal evacuation performance of the joint is improved by increasing the heat exchange area across the joint. Also, grooves along the C f /C interface enable mechanical interlocking with the brazing seam, achieving an enhanced joint strength. The heat transfer process of the brazed joint is simulated and analyzed by the finite element method. The analysis indicated that the thermal evacuation across the joint can be enhanced by pre-fabricating a 3D heat transfer interface in the joint. This research can provide a reference for solving the problem of heat accumulation in the first wall materials inside thermonuclear reactors.

Achieving High Thermal Conductivity Joining of Cf/C and Haynes 230 by Using Cu-Mo30Cu-Ti Composite Foil As Thermal Interface Material

Achieving high thermal conductivity joining of C f /C and Haynes 230 by using Cu-Mo30Cu-Ti composite foil as thermal interface material

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Exploring the Role of Liquid Braze Filling the Dissimilar Cf/C-Haynes 230 Joint to Enhance the Interfacial Heat Transfer

Achieving High-Temperature Thermal Evacuation Between Dissimilar Materials Cf/C and Mo30Cu by Forming a Brazed Joint

Achieving high-temperature thermal evacuation between dissimilar materials C f /C and Mo30Cu by forming a brazed joint

Achieving High-Thermal-conductivity Brazed Joint Between Carbon-Based Composites and Mo-Cu Alloys by Increasing the Heat Transfer Area

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Enhancing the High-Temperature Thermal Evacuation of Cf/C-Mo30Cu Joint Via Grooving 3D Heat Transfer Interface

Enhancing the high-temperature thermal evacuation of C f /C-Mo30Cu joint via grooving 3D heat transfer interface

Investigating the Role of Surface Contact Area Adjustment for Enhancing Interfacial Heat Transfer of the Cf/C-Haynes 230 Joint

High temperature brazing of C/C using Hastelloy C-276 as filler and joint formation mechanism

Ultra-high Temperature Brazing of C/C Using a Simplified FeNiCrCu High-Entropy Alloy As Filler

Pre-infiltration and brazing behaviors of Cf/C composites with high temperature Ti Si eutectic alloy

Brazing of C/C Composite to TiAl Alloy Using (ti/ni/cu)f Multi-foil Filler

Study on the structure and thermal properties of graphite/copper laminated composites assembled by Ti-containing active filler metals

Achieving Interfacial Thermal Expansion Matching Between C/C Composites and Metal Through Ultrafast High-Temperature Shock (UHS)

Brazing of C/C Composite and TiAl Alloy Using TiNiSi Filler Metal Added Cu Interlayer

Fabrication and Multiscale Heat Transfer Modeling of High Thermal Conductivity Cf/HfB2-SiC Composites

Active Brazing Carbon/carbon Composite to TC4 with Cu and Mo Composite Interlayers

Experimental Investigation of High-temperature Thermal Contact Resistance Between C/C Composite Material and Superalloy GH600