Abstract:Gas–surface interactions between thermal protection materials and high-enthalpy nonequilibrium flow are one of the greatest challenges in accurately predicting aerodynamic heating during supersonic flights. Finer microscopic details of flow properties are required for elaborate simulation of these interactions. Spectral insight, with quantum-state-specific characteristics, is provided in this work to investigate the physico-chemical processes in high temperature interface of a carbon/carbon (C/C) composite. The nonequilibrium air flow is produced by a 1.2 MW inductively coupled plasma wind tunnel at an enthalpy of 20.08 MJ/kg. The duration of each test is up to 100 s, and quartz is also tested for comparison. Spectral insights into the reaction mechanisms of the gas–surface interactions are acquired by the optical emission spectroscopy and laser absorption spectroscopy. Dynamic evolution of the chemical reaction pathways and thermal nonequilibrium are discussed based on the results of optical emission spectroscopy. Temporally and spatially resolved results of the translational temperature and number density of atomic oxygen are quantified by laser absorption spectroscopy. Controlling mechanisms in the surface chemistry are further analyzed in conjunction with the surface temperature, scanning electron microscopy, and energy dispersive spectroscopy. Reaction mechanisms on the C/C composite surface sequentially experience an oxidation-dominant, an intense competitive, a nitridation-dominant, and a recession dominant period. Distributions in the axial direction and dynamic characteristics of the translational temperature and number density of atomic oxygen are found closely related with surface swelling, recession, and chemical reactions. The results herein are consistent with each other and are instructive to further investigate the interface evolution on C/C composites.

Experimental Investigation of High-temperature Thermal Contact Resistance Between C/C Composite Material and Superalloy GH600

Experimental Investigation of High Temperature Thermal Contact Resistance with Interface Material

Microstructural analysis of the thermal fatigue tested Be/CuCrZr joint with artificial defects between Ti/Cu interlayers

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Thermo-mechanical Analysis of a Multilayer Hollow Cylindrical Thermal Protection Structure with Functionally Graded Ultrahigh-Temperature Ceramic to Be Heat Resistant Layer

Corrosion Failures of High Temperature Heat Pipes

Mechanism of Thermomechanical Coupling of High Temperature Heat Pipe Cooled C/C Composite Material Thermal Protection Structure

Thermomechanical Coupling Analysis of Heat-Pipe-cooled Leading Edge Thermal Protection Structure with Thermal Contact Resistance

Three-dimensional numerical study of the directional heat transfer in an L-shaped carbon/carbon composite thermal protection system

Heat Transfer Capability Simulation of High-Temperature Heat Pipe in Supersonic Vehicle Leading Edge Applications

Overall cooling investigation of the composite platforms considering the anisotropic thermal conductivities and weaving pattern

Experimental Investigation of High Temperature Thermal Contact Resistance of Thin Disk Samples Using Infrared Camera in Vacuum Condition

Thermal Shock and Residual Strength Testing of SiC/SiC Composite Braided Tubes

Investigation of High-Speed Rubbing Behavior of GH4169 Superalloy with SiC/SiC Composites

Test and simulation of high temperature resistant polyamide composite with single lap single bolt connection

Spectral insight into the interface evolution of a carbon/carbon composite under high-enthalpy, nonequilibrium flow

Achieving high thermal conductivity joining of C f /C and Haynes 230 by using Cu-Mo30Cu-Ti composite foil as thermal interface material

Thermal response of the two-directional high-thermal-conductive carbon fiber reinforced aluminum composites with low interface damage by a vacuum hot pressure diffusion method

Microstructure, Mechanical and Ablation Properties of Transpiration Cooling Applied to C/C-SiC Composite for Novel Anti-ablation Material

Thermal Mismatch Effect and High-Temperature Tensile Performance Simulation of Hybrid CMC and Superalloy Bolted Joint by Progressive Damage Analysis

Parametric Influences of Geometric Dimensions on High Temperature Mechanical Behaviors and Damage Mechanisms of Ceramic Matrix Composite and Superalloy Double Bolted Joints