Abstract:Sc0.18Al0.82N/GaN with state-of-the-art x-ray diffraction figures of merit grown by metal modulated epitaxy under metal-rich conditions and a low substrate temperature of 400 °C is demonstrated to have improved crystalline order [250 arc sec for the (0002) reflection and 469 arc sec for the (101 ̄5)] compared to a previous state-of-the-art sample grown at a more conventional temperature of 650 °C. While both samples show a columnar structure, the higher substrate temperature sample has a good symmetric rocking curve (RC) of 229 arc sec, but unlike the lower temperature sample, the RC of the (101 ̄5) asymmetric reflection could not be measured, indicating a more columnar structure common among ScAlN films. Local lattice constant maps (LLCMs) from 4D-STEM depict abrupt strain relaxation within ∼2 nm from the ScAlN/GaN interface for the sample grown at Tsub = 400 °C. Since these LLCMs suggest a lattice mismatch in the a-lattice constant, and since the films show a sudden roughening, the composition for lattice match to GaN may be less than the accepted 18%–20% Sc, consistent with the average GaN lattice match from lattice constant values reported in the literature of 12%. Compared to traditional III-Nitrides, ScAlN films have substantially more screw and mixed-type threading dislocations, suggesting substantial shear forces that result in significant twist and distortion leading to orthorhombic diffraction patterns as viewed from plan-view TEM in the Tsub = 650 °C sample. These results offer the possibility of ScAlN integration into low-thermal-budget processes including CMOS but further indicate that structural understanding of ScAlN remains lacking.

Improved Surface Morphology and Reduced V-Pits Density of Lattice-Matched Alinn Films Grown by Atmospheric Pressure Metalorganic Chemical Vapor Deposition

Sputtering Growth of Preferential C-Axis-oriented Aluminum Nitride Film Using Homogeneous Buffer Layer

Growth and characterization of AlInN/GaN superlattices

High-quality AlN growth: a detailed study on ammonia flow

Ga-free AlInN films growth by close-coupled showerhead metalorganic chemical vapor deposition

Enhanced performance of (112 ̄2) plane p-AlGaN grown with indium surfactant

Improved Characteristics of (112‾2) Al0.62Ga0.38N Film Grown with Pulsed Flow Growth Technique

Epitaxial AlN film with improved quality on Si (111) substrates realized by boron pretreatment via MOCVD

Al Incorporation, Structural and Optical Properties of AlxGa1−xN (0.13⩽x⩽0.8) Alloys Grown by MOCVD

Reduced dislocation density and residual tension in AlN grown on SiC by metalorganic chemical vapor deposition

Unintentionally Doped InN Grown Onto an Atomically Flat AlN Intermediate Layer Using Plasma‐assisted Molecular Beam Epitaxy

Structural and Optical Properties of AlxGa1−xN (0.33 ≤ X ≤ 0.79) Layers on High-Temperature AlN Interlayer Grown by Metal Organic Chemical Vapor Deposition

Growth of High Quality N-Al0.5ga0.5n Thick Films by Mocvd

Pit density reduction for AlN epilayers grown by molecular beam epitaxy using Al modulation method

Improved crystallographic order of ScAlN/GaN heterostructures grown at low temperatures under metal rich surface conditions

Surface States of Inaln Film Grown by Mocvd

Pulsed sputtering epitaxy of coherent AlN/Al0.5Ga0.5N/AlN multichannel structures

Improving quality of AlN films on GaAs substrate via in-situ plasma pre-treatment in plasma enhanced atomic layer deposition

Variational Al Composition Crack-free AlGaN Films Grown by Metal Organic Chemical Vapor Deposition

Material Properties of Mocvd Grown Algan Layers Influenced by Indium-Incorporation

Crystalline Quality of InxAl1-xN with Different Indium Contents Around Lattice-Matched to GaN