Abstract:In order to solve the interference of narrowband communication system to ultra-wideband (UWB) system and meet the design requirements of high isolation of multiple-input multiple-output (MIMO) antenna, two MIMO antennas with double notch structures are designed. Firstly, a two-element antenna was placed symmetrically in parallel, and two rectangular branches were loaded to improve the isolation. U-shaped slots and inverted U-shaped slots are etched on the radiating patch and feeder to achieve notch characteristics in WIMAX and ITU band, respectively. Then, in order to meet more application scenarios, a four-element MIMO antenna is designed, where each element is placed orthogonally to each other, and the isolation is improved by loading a cross-shaped branches in the middle of elements. Both antenna samples are tested to verify the design. Measured results show that the working bandwidth of the two-element UWB MIMO antenna is 2.45-14.88 GHz, the isolation is greater than 17 dB, the peak gain is 5.7 dB, the maximum radiation efficiency can reach 96%, the envelope correlation coefficient (ECC)is less than 0.02. Meanwhile, the working bandwidth of the four-element antenna is 2.14-14.95 GHz, the isolation is greater than 20 dB, the peak gain is 5.9 dB, the maximum radiation efficiency can reach 95%, the ECC is lower than 0.05. They both are with very good omnidirectional characteristic, and meet the requirements of the UWB application.

Broadband Eight-Way High-Isolation Cavity Power Divider with Low Insertion Loss for MIMO Communication Systems

A Broadband Power Divider with 90 Degree Phase Shifter

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

UWB 16-Way Hybrid Coaxial/Ring Cavity Power Divider with Low Insertion Loss

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

Investigation of Parallel and Quadrature MIMO Antennas with Double-Notched Structure for UWB Applications

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Hybrid Coaxial/Substrate Integrated Waveguide Eight-Way Power Divider

Design and analysis of six-channel power divider with high power and low loss

Efficient Isolation of an MIMO Antenna Using Defected Ground Structure

6–18GHz sixteen-way ring-cavity power divider using symmetrically coaxial taper excitation

Broadband Six-Way Out-Of-Phase Siw Power Divider

Novel Design of Dual-Band Unequal Wilkinson Power Divider

Design and Measurement of a Six-Way Microwave Power Splitter with Good Phase Consistency

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

A Design of Wide-Band and High-Isolation Power Divider

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line