Abstract:Background: The ultrasonic transducer is one of the core components of ultrasound systems, and the transducer's sensitivity is significantly related the loss of electronic components such as the transmitter, receiver, and protection circuit. In an ultrasonic device, protection circuits are commonly used to isolate the electrical noise between an ultrasound transmitter and transducer and to minimize unwanted discharged pulses in order to protect the ultrasound receiver. However, the performance of the protection circuit and transceiver obviously degrade as the operating frequency or voltage increases. We therefore developed a crossed SMPS (Switching Mode Power Supply) MOSFET-based protection circuit in order to maximize the sensitivity of high frequency transducers in ultrasound systems.The high frequency pulse signals need to trigger the transducer, and high frequency pulse signals must be received by the transducer. We therefore selected the SMPS MOSFET, which is the main component of the protection circuit, to minimize the loss in high frequency operation. The crossed configuration of the protection circuit can drive balanced bipolar high voltage signals from the pulser and transfer the balanced low voltage echo signals from the transducer. Methods: The equivalent circuit models of the SMPS MOSFET-based protection circuit are shown in order to select the proper device components. The schematic diagram and operation mechanism of the protection circuit is provided to show how the protection circuit is constructed. The P-Spice circuit simulation was also performed in order to estimate the performance of the crossed MOSFET-based protection circuit. Results: We compared the performance of our crossed SMPS MOSFET-based protection circuit with a commercial diode-based protection circuit. At 60 MHz, our expander and limiter circuits have lower insertion loss than the commercial diode-based circuits. The pulse-echo test is typical method to evaluate the sensitivity of ultrasonic transducers. Therefore, we performed a pulse-echo test using a single element transducer in order to utilize the crossed SMPS MOSFET-based protection circuit in an ultrasound system. Conclusions: The SMPS-based protection circuit could be a viable alternative that provides better sensitivity, especially for high frequency ultrasound applications.

Research on High Power Output Characteristics of an Low-frequency Solid-state Protector

Immunity Analysis and Experimental Investigation of a Low-Noise Amplifier Using a Transient Voltage Suppressor Diode under Direct Current Injection of HPM Pulses

Study of Turn-on Characteristics of SCRs for ESD Protection with TDR-O and TDR-S TLPs

Development of the Plasma Limiter for High Power Microwave Weapon Protection

Protection Effects Using Transient Voltage Suppressor Diodes Based Circuits under High-Power Microwave Pulses

Protection circuits for very high frequency ultrasound systems

A novel power-clamp assisted complementary MOSFET for robust ESD protection.

Multiple Transient Voltage Suppressor Diodes-Based Protection Circuits with Decreasing Loading Effect under High-Power Microwave Pulses

Whole Chip ESD Protection Design for 2.4 GHz LNA

Research on Anti-strong Electromagnetic pulse Technology for Power Port of Land Warfare Platform

Improvement on Diode String Structure for 65-Nm RF ESD Protection

Evaluation of RF electrostatic discharge (ESD) protection in 0.18-μm CMOS technology

Whole Chip Esd Protection for 2.4 Ghz Lna

Design of Intelligent Protection Module for Low-voltage Power Distribution System

Transient Voltage Suppressor Diode Array Protection Circuits with Reducing Loading Effect under High-Power Microwave Pulse Injection

Research on Protection Performance of Surge Protective Devices against Electromagnetic Pulse

Research on high-current power amplifying circuit in protective relay test device

Simulation of Simplified Cascade Waveguide Plasma Limiter under High Power Microwave

Crossed SMPS MOSFET-based protection circuit for high frequency ultrasound transceivers and transducers

Development of a Coaxial Fixture for the Performance Test of Electromagnetic Pulse Protection Devices

Method of drive and rapid protection for high power IGBTs