Abstract:This study presents a detailed investigation into the deformation behaviour and the factors affecting the strength and ductility of laser powder bed fusion (LPBF) Ni-based superalloy 718 (Inconel 718) in both as-printed and heat-treated conditions using in-situ SEM + EBSD. The results show that following post-deposition high homogenization temperatures, the columnar grain structure of the as-printed Inconel 718 alloy successfully transformed to a nearly uniform grain size and the subsequent aging processes facilitated the precipitation of strengthening phases (gamma ', ' , gamma"). The specimen subjected to heat treatment (HT1) exhibited higher strength but lower ductility, while the as-printed specimen shows higher tensile elongation due to high initial dislocation density. In contrast, the heat-treated (HT2) specimen presented a more optimal combination of strength and ductility. The underlying mechanism for the enhanced tensile properties in the HT2 specimen was nearly homogeneous deformation trend across the grains and ultrafine precipitation of hardening phases. In addition, the twin boundaries were stable in the early deformation stages and maintained their orientation. Multiple slip systems were activated at the high-deformation stage, resulting in a high proportion of geometric necessary dislocations. Further, the interaction of deformation-induced dislocation with twin boundaries transformed them into general boundaries such as high and low-angle grain boundaries, ultimately increasing ductility. On contrary, in the HT1 specimen, the deformation inhomogeneity in grains enabled the strain localization at grain boundaries, which ultimately caused the early formation of cracks.

Nano Y2o3 Particle Enhanced In718 Nickel-Based Superalloy Fabricated by Laser Powder Bed Fusion

Laser additive manufacturing of CrFeNb particles reinforced Ni-based superalloy composites with grain refinement and superior performance

Effects of yttrium content on solidification, microstructure, and mechanical properties of laser powder bed fused IN718 superalloy

Crack Inhibition and Performance Modification of NiCoCr-Based Superalloy with Y2O3 Nanoparticles by Laser Metal Deposition

Simultaneously Enhancing Strength and Ductility of LPBF Ti Alloy Via Trace Y2O3 Nanoparticle Addition

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

Effect of Nano Y2O3 Addition on Microstructure and Room Temperature Tensile Properties of Ti–48Al–2Cr–2Nb Alloy

Effect of yttrium addition on microstructural evolution and high temperature mechanical properties of Ni-based superalloy produced by selective laser melting

Microstructures and High-Temperature Mechanical Properties of Inconel 718 Superalloy Fabricated via Laser Powder Bed Fusion

Laser powder bed fusion of nano-titania modified 2219 aluminium alloy with superior mechanical properties at both room and elevated temperatures: The significant impact of solute

Enhancing Strength and Ductility of Graphene and ZrO2 Nanoparticles Hybrid Reinforced AA2024 Composite Fabricate by Laser Powder Bed Fusion

Design of a novel crack-free precipitation-strengthened nickel-based superalloy and composites for laser powder bed fusion

Laser powder bed fusion of a novel nano-modified tungsten alloy with refined microstructure and enhanced strength

In-situ synthesis of Yttria-based precipitates and their effects on Fe12Cr6Al in laser powder bed fusion

Strengthening Effects and Thermal Stability of the Ultrafine Grained Microstructure of a Nickel Base Superalloy at Room and Elevated Temperatures

A Novel γ'-Strengthened Nickel-Based Superalloy for Laser Powder Bed Fusion

Introduction of nanoprecipitation into supersaturated CoCrFeNiMo0.5 alloy prepared by laser-powder bed fusion via microstructure tailoring to achieve excellent properties

Inhibition of Cracking by Grain Boundary Modification in a Non-Weldable Nickel-Based Superalloy Processed by Laser Powder Bed Fusion

The Precipitation Behavior Effect of Δ and Γ" Phases on Mechanical Properties of Laser Powder Bed Fusion Inconel 718 Alloy

Laser-based powder bed fusion of pre-alloyed oxide dispersion strengthened steel containing yttrium

Laser metal deposited steel alloys with uniform microstructures and improved properties prepared by addition of small amounts of dispersed Y2O3 nanoparticles