Abstract:Yttria-stabilized zirconia (YSZ) has been extensively used as a thermal barrier coating (TBC) for high-temperature alloys. In this research, the microstructural attributes and thermal expansion behavior of an additively manufactured functionally graded composite (YSZ/IN718 FGC) were investigated. First, a powder mixture of IN718 and YSZ (ranging from 1 wt% to 4 wt%) was achieved via low-energy ball-milling at 100 rpm. Differential scanning calorimetry (DSC) analysis depicted the melting behaviour of the powder mixtures of different YSZ content. The endothermic peaks in the DSC curve, at ∼1360 °C, suggested that the energy needed to melt the powder mixture increases with increasing YSZ content. These varying powder compositions were used to fabricate FGC samples using L-PBF. The study investigated the effects of laser power variation along the YSZ gradient, successfully mitigating the fusion defects that had been initially observed in FGC samples. Microscopic analyses, comprising scanning electron microscopy (SEM) and transmission electron microscopy (TEM), depicted the elemental segregation of Nb and Mo at the solidification subgrain boundaries (SSBs). Furthermore, the electron backscattered diffraction (EBSD) results demonstrated the refinement of grains and a reduction in textural intensity, particularly along the YSZ gradient. Energy dispersive spectroscopy (EDS) and electron probe micro analysis (EPMA) were used to validate the uniform dispersion of YSZ particles throughout the composite matrix, with the EPMA line scan affirming a predominantly linear YSZ content variation. Lastly, the coefficients of thermal expansion (CTEs) were evaluated, both parallel and perpendicular to the build direction. A decrease of approximately ∼6 % in CTE was noted along the building or gradation direction. Notably, perpendicular to the building direction, the CTE values for specimens containing 4 wt% and 2 wt% YSZ witnessed significant reductions of ∼32 % and ∼12 %, respectively. This research significantly contributes to the understanding of the microstructural intricacies and thermal behavior of YSZ/IN718 FGC produced by L-PBF process.

Effects of yttrium content on solidification, microstructure, and mechanical properties of laser powder bed fused IN718 superalloy

Effect of yttrium addition on microstructural evolution and high temperature mechanical properties of Ni-based superalloy produced by selective laser melting

Effect of yttrium on phase composition and microstructure of FeCoNiAlCrB high entropy alloys

Investigation of microstructure and thermal expansion behaviour of a functionally graded YSZ/IN718 composite produced by laser-powder bed fusion

In-situ synthesis of Yttria-based precipitates and their effects on Fe12Cr6Al in laser powder bed fusion

Microalloying effects of Y on performance of cast nickel-based superalloy IN713C

Tensile Properties and Coefficient of Thermal Expansion of Laser Powder Bed Fusion Fabricated IN718‐YSZ Compositionally Graded Composite

Effects of CoAl2O4 inoculants on microstructure and mechanical properties of IN718 processed by selective laser melting

Yttrium effect on 475 °C brittleness of Fe–13Cr–6Al–2Mo-0.5Nb-0.15Zr alloy

Microstructure and mechanical properties at elevated temperatures of as-built and heat-treated Inconel 718 produced through laser powder bed fusion processes

Creep anisotropy reduction and improvement via post-heat treatment in yttrium-added Hastelloy-X fabricated by laser powder bed fusion

Effects of yttrium additions on microstructures and mechanical properties of cast Al-Cu-Mg-Ag alloys

Microstructure and mechanical performance of ODS superalloys manufactured by selective laser melting

Microstructure and mechanical properties of additive manufactured Inconel 718 alloy strengthened by oxide dispersion with 0.3 wt% Sc addition

Effect of Yttrium Addition on Microstructure and Mechanical Properties of Sr-Modified Low-Si Cast Aluminum Alloy

Effect of Y 2 O 3 on microstructure and mechanical properties of 34CrNiMo6 steel fabricated by laser-directed energy deposition

Microstructure and mechanical property comparison of Inconel alloys fabricated using micro and conventional laser powder bed fusion

Effect of high preheating on the microstructure and mechanical properties of high gamma prime Ni-based superalloy manufactured by laser powder bed fusion

Microstructural evolution and mechanical properties of IN718 alloy fabricated by selective laser melting following different heat treatments

Effects of phosphorus and boron on the γ′′ precipitate evolution and creep properties of IN718 superalloy during long-term thermal exposure at 680 °C

Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion