Abstract:Yttria-stabilized zirconia (YSZ) has been extensively used as a thermal barrier coating (TBC) for high-temperature alloys. In this research, the microstructural attributes and thermal expansion behavior of an additively manufactured functionally graded composite (YSZ/IN718 FGC) were investigated. First, a powder mixture of IN718 and YSZ (ranging from 1 wt% to 4 wt%) was achieved via low-energy ball-milling at 100 rpm. Differential scanning calorimetry (DSC) analysis depicted the melting behaviour of the powder mixtures of different YSZ content. The endothermic peaks in the DSC curve, at ∼1360 °C, suggested that the energy needed to melt the powder mixture increases with increasing YSZ content. These varying powder compositions were used to fabricate FGC samples using L-PBF. The study investigated the effects of laser power variation along the YSZ gradient, successfully mitigating the fusion defects that had been initially observed in FGC samples. Microscopic analyses, comprising scanning electron microscopy (SEM) and transmission electron microscopy (TEM), depicted the elemental segregation of Nb and Mo at the solidification subgrain boundaries (SSBs). Furthermore, the electron backscattered diffraction (EBSD) results demonstrated the refinement of grains and a reduction in textural intensity, particularly along the YSZ gradient. Energy dispersive spectroscopy (EDS) and electron probe micro analysis (EPMA) were used to validate the uniform dispersion of YSZ particles throughout the composite matrix, with the EPMA line scan affirming a predominantly linear YSZ content variation. Lastly, the coefficients of thermal expansion (CTEs) were evaluated, both parallel and perpendicular to the build direction. A decrease of approximately ∼6 % in CTE was noted along the building or gradation direction. Notably, perpendicular to the building direction, the CTE values for specimens containing 4 wt% and 2 wt% YSZ witnessed significant reductions of ∼32 % and ∼12 %, respectively. This research significantly contributes to the understanding of the microstructural intricacies and thermal behavior of YSZ/IN718 FGC produced by L-PBF process.

Tensile Properties and Coefficient of Thermal Expansion of Laser Powder Bed Fusion Fabricated IN718‐YSZ Compositionally Graded Composite

Investigation of microstructure and thermal expansion behaviour of a functionally graded YSZ/IN718 composite produced by laser-powder bed fusion

Effect of Processing Parameters on the Microstructure, Mechanical Properties and Thermal Expansion Behavior of Invar 36 Alloy Manufactured by Laser Powder Bed Fusion

Effects of yttrium content on solidification, microstructure, and mechanical properties of laser powder bed fused IN718 superalloy

Microstructure and mechanical property comparison of Inconel alloys fabricated using micro and conventional laser powder bed fusion

Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718

Tribological property and thermal shock resistance of NiCoCrAlY coated YSZ composite coatings prepared by different laser additive manufacturing scanning speeds

Mechanical properties of laser powder bed fusion processed Inconel alloy IN718 in different heat treatment conditions through small scale specimen testing

Microstructure and mechanical properties at elevated temperatures of as-built and heat-treated Inconel 718 produced through laser powder bed fusion processes

Effect of Electric Pulse Treatment on Microstructure and Mechanical Property of Laser Powder Bed Fused IN718

The 650 °C Tensile Deformation of Graded IN718-René41 Superalloy Fabricated by Laser Blown-Powder Directed Energy Deposition

The effect of carbon fiber length on the thermal expansion of fiber‐reinforced particulate hybrid composites

Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room‐ and High Temperature

Impact of process parameters on the dynamic behavior of Inconel 718 fabricated via laser powder bed fusion

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

Effect of Solid Solution Temperature on Material Properties and Microstructure of Inconel 718/TiC Composites by Selective Laser Melting

Effects of a modified heat-treatment on microstructure and mechanical properties of additively manufactured Inconel 718

Effect of Powder Layer Thickness on Residual Stress in Laser Powder Bed Fusion of IN718

Determination of the anisotropy in mechanical properties of laser powder bed fusion Inconel 718 by ultrasonic testing

Interfacial characteristics of multi-material SS316L/IN718 fabricated by laser powder bed fusion and processed by high-pressure torsion

Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion