High power laser powder bed fusion of Ti6Al4V alloy: The control of defects, microstructure, and mechanical properties
Jinfeng Deng,Qiao Zhong,Jia Chen,Kaiwen Wei,Xiaoze Yue,Yuguang Liu,Gaohang Li,Xiangyou Li,Xiaoyan Zeng
DOI: https://doi.org/10.1016/j.jmrt.2024.10.152
IF: 6.267
2024-10-21
Journal of Materials Research and Technology
Abstract:Laser powder bed fusion (LPBF) is the most widely used metal additive manufacturing technology, but it still faces challenges in manufacturing efficiency. To address the issue, high-power LPBF (HP-LPBF) which employs kilowatt-level lasers emerges in recent years. In this study, a 4 kW Flat-top laser was used for the HP-LPBF of Ti6Al4V alloy. The samples in as-built state and annealed states (750 °C/2h, 850 °C/2h, 950 °C/2h, 1050 °C/2h) were investigated in terms of defects, microstructure, and mechanical properties. Results show that keyhole mode melting is avoided by adopting the Flat-top laser, so the relative density of as-built Ti6Al4V is generally positively correlated with the employed laser energy density. The minimum laser energy density to obtain the high-density (≥99.9%) sample is 50.0 J/mm 3 , and the highest build rate is 288 cm 3 /h. The microstructure in as-built state exhibits a unique alternating pattern of "bright bands/dark bands". The dark bands consist of needle-shaped α′ martensite, while the bright bands consist of needle-shaped α+β, which results from the decomposition of α′ under the in-situ annealing effect of the 4 kW Flat-top laser. After annealing at 750 °C, most of the residual α′ decomposes into needle-shaped α+β. As the annealing temperature increases from 750 °C to 1050 °C, the microstructure undergoes an evolution from needle-shaped α+β to lamellar α+β then to lamellar α+β with some globular α and finally to duplex α+β. An optimum strength-ductility balance is achieved after annealing at 850 °C, both the tensile strength and the elongation exceed the standard values of Ti6Al4V forgings.
materials science, multidisciplinary,metallurgy & metallurgical engineering